Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: Ann on October 13, 2008, 12:08:21 AM

Title: M86HC11
Post by: Ann on October 13, 2008, 12:08:21 AM

i'm newbie here..i made a final year project which is line following robot using m86hc11..

can anybody here help me explain to me can it be done with m86hc11 cause i found many line follower using PIC but never find one using m86hc11..i'm confuse is it can be done?? :(

Title: Re: M86HC11
Post by: ArcMan on October 13, 2008, 12:15:09 PM

I'm sure it can be done with an HC11.  A friend of mine made a more complex control system than a line-follower with an HC11 in a robot contest a few years ago.

I don't know much about the chip myself, but it's got all the basics - I/O, timers, etc.

Title: Re: M86HC11
Post by: airman00 on October 13, 2008, 12:16:09 PM

must it be with that specific microcontroller?

Title: Re: M86HC11
Post by: Ann on October 13, 2008, 04:41:03 PM

yes..i have some basic about M68HC11 but i dont know much about advance programming in 6811..

i believe i can get some information and help here..

i know by using PIC is much easier but my scope project is using m68hc11

so,what are your opinion different between PIC and M68HC11

Title: Re: M86HC11
Post by: ArcMan on October 13, 2008, 08:21:37 PM

The difference between the 2 is not opinion, but well documented information.  Check out the specs for both and compare.

Title: Re: M86HC11
Post by: Ann on October 14, 2008, 01:54:22 PM

thank...i've been search for the different of this two,but i never find the line follower using 6811..i think PIC is much better for controlling robot..

so i'm curios about my project..which is can be done in time or i never finish my work...

sorry for my curious :(

Title: Re: M86HC11
Post by: Ro-Bot-X on October 14, 2008, 03:28:13 PM

Lego RCX is based on 6811. Also there is the Handyboard. Chek out this link:
http://www.handyboard.com/ (http://www.handyboard.com/)

Title: Re: M86HC11
Post by: Ann on October 15, 2008, 02:12:49 PM

thanks a lot..i really appreciate your help  :)