go away spammer

### Author Topic: PID Line Follower By Pratheek PCB Dimensions  (Read 3538 times)

0 Members and 1 Guest are viewing this topic.

#### zebrain

• Beginner
• Posts: 1
##### PID Line Follower By Pratheek PCB Dimensions
« on: August 11, 2010, 12:24:36 PM »
The dimensions of the sensor array as well as the main PCB is given to be the same i.e 10cm x 4.5cm.It must be rite for the sensor array,so what is the correct dimensions for the main board??

#### Aravindh

• Beginner
• Posts: 5
##### Re: PID Line Follower By Pratheek PCB Dimensions
« Reply #1 on: September 25, 2010, 05:19:45 AM »
Hi the dimensions arent correct...
U have to create ur own diagram and u cant fabricate the pcb given in the diagram..

#### nik@sdm

• Jr. Member
• Posts: 26
##### Re: PID Line Follower By Pratheek PCB Dimensions
« Reply #2 on: December 25, 2011, 10:07:07 AM »
hey anyone...
please tell me where the push buttons need to be connected!

#### Soeren

• Supreme Robot
• Posts: 4,672
##### Re: PID Line Follower By Pratheek PCB Dimensions
« Reply #3 on: December 25, 2011, 01:59:53 PM »
Regards,
Søren

A rather fast and fairly heavy robot with quite large wheels needs what? A lot of power?
Engineering is based on numbers - not adjectives

#### nik@sdm

• Jr. Member
• Posts: 26
##### Re: PID Line Follower By Pratheek PCB Dimensions
« Reply #4 on: December 25, 2011, 11:09:13 PM »
hi soren....
i just wanted to know .......
1)where the push buttons are connected .
2)what is the meaning of IC1 in the figure
3)there are 7 pins at the bottom of the board(just below the ATmeag16 IC),nothing is mentioned about them....so what must be connected to them!
I'll be really grateful to u... pls help me out of this situation.

#### Soeren

• Supreme Robot
• Posts: 4,672
##### Re: PID Line Follower By Pratheek PCB Dimensions
« Reply #5 on: December 26, 2011, 09:57:30 AM »
hi soren....
i just wanted to know .......
Yeah yeah, but that is not an excuse for multiposting (spamming) with the same question.
No reason for verbatim copy to my PM either - One post in the public forum will do (and not annout the daylight out of other people).
Regards,
Søren

A rather fast and fairly heavy robot with quite large wheels needs what? A lot of power?