Society of Robots - Robot Forum
|
Robot Tutorials
|
FAQ
|
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Squirrels have fuzzy tails.
Home
Help
Search
Login
Register
Society of Robots - Robot Forum
»
Electronics
»
Electronics
»
I2C pins on AxonII
Print
Author
Topic: I2C pins on AxonII (Read 1776 times)
0 Members and 1 Guest are viewing this topic.
Aberg098
Full Member
Posts: 66
Helpful? 0
I2C pins on AxonII
«
on:
June 24, 2010, 08:45:25 AM »
Quick newbie question again:
So which pins on the AxonII corresponds to the SCL and SDA for the I2C connection?
I can see where I2C is labelled on the board, I also know that the outermost (ground) connection is not used.
Logged
Admin
Administrator
Supreme Robot
Posts: 11,703
Helpful? 173
Re: I2C pins on AxonII
«
Reply #1 on:
June 24, 2010, 09:36:12 AM »
Have a look at the schematic, it'll be obvious. Unfortunately I couldn't cram all that text directly on the board
Logged
subscribe to SoR's YouTube account
Aberg098
Full Member
Posts: 66
Helpful? 0
Re: I2C pins on AxonII
«
Reply #2 on:
June 24, 2010, 09:41:18 AM »
If you mean this schematic:
http://www.societyofrobots.com/axon2/downloads/axon2_schematic.pdf
I completely fail to see how this is obvious.
Logged
paulstreats
Guest
Re: I2C pins on AxonII
«
Reply #3 on:
June 24, 2010, 09:53:19 AM »
Under the "special headers" part, the first is the I2C header. SCL is in the middle and SDA is on the outside(the opposite one from the GND)
Logged
Aberg098
Full Member
Posts: 66
Helpful? 0
Re: I2C pins on AxonII
«
Reply #4 on:
June 24, 2010, 09:57:38 AM »
Thank you!
Logged
Print
Society of Robots - Robot Forum
»
Electronics
»
Electronics
»
I2C pins on AxonII
data_list