Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: ben25 on April 07, 2024, 02:17:07 AM

Title: Use closed loop stepper motors instead of open loop stepper motors
Post by: ben25 on April 07, 2024, 02:17:07 AM

Hello everyone,
My 3D printer has a slow printing speed. Once the speed is increased, the motor will easily lose synchronization, and the accuracy and success rate will drop significantly. If I want to solve these problems, can I use a closed loop stepper motor instead of an open loop stepper motor? A motor similar to this: https://www.oyostepper.de/goods-533-Nema-17-Closed-Loop-Schrittmotor-09-Grad-44-Ncm-mit-Encoder-1000CPR-Schrittmotoren-mit-Geschlossenem-Regelkreis.html