Author Topic: my 1st robot (help needed)  (Read 4333 times)

0 Members and 1 Guest are viewing this topic.

Offline peddiTopic starter

  • Jr. Member
  • **
  • Posts: 9
  • Helpful? 0
my 1st robot (help needed)
« on: March 12, 2008, 05:36:41 AM »
hi !
im new here and this is my first post
i should say that i want to make my first robot and i want a robot for sensing fire.i want to know that wht kind of sensor should i use for sensing temperture.


thanks
« Last Edit: March 12, 2008, 05:39:06 AM by peddi »

Offline cooldog

  • Supreme Robot
  • *****
  • Posts: 751
  • Helpful? 4
  • be nice to nerds, one day they will be your boss
Re: my 1st robot (help needed)
« Reply #1 on: March 12, 2008, 08:39:21 AM »
heat sensor :P ;D
robot will rule the world and i will be building them
-admin

favorite web sites
http://www.societyofrobots.com/
http://www.instructables.com/

Offline superchiku

  • Supreme Robot
  • *****
  • Posts: 952
  • Helpful? 5
  • cooll
Re: my 1st robot (help needed)
« Reply #2 on: March 12, 2008, 08:42:39 AM »
why do u need a robot that senses fire if its just going to sense then wats the use of a robot , yes if u need heat sensors on a robot to do a specific job then its ok
JAYDEEP ...

IT AND ROBOTICS ENGINEER

"IN THE END IT DOESNT EVEN MATTER"

Offline peddiTopic starter

  • Jr. Member
  • **
  • Posts: 9
  • Helpful? 0
Re: my 1st robot (help needed)
« Reply #3 on: March 12, 2008, 10:55:38 AM »
i want a robot for sensing fire,then go to the near of fire and then turn down the fire.did u get it?!  ::) srry i forget its name in english.
i mean smth like line tracer.i know in line tracer there is a sensor that can sense the line with the reflex of the light from the ground.now i want a robot for sensing and finding fire and i dont know wht should i do.can u help me?! please its so important  :-\

Offline cooldog

  • Supreme Robot
  • *****
  • Posts: 751
  • Helpful? 4
  • be nice to nerds, one day they will be your boss
Re: my 1st robot (help needed)
« Reply #4 on: March 12, 2008, 01:59:44 PM »
i want a robot for sensing fire,then go to the near of fire and then turn down the fire.did u get it?!  ::) srry i forget its name in english.

it's called a fire truck

anyway you might be able to adapt a photovore algritum it work it heat sensors
robot will rule the world and i will be building them
-admin

favorite web sites
http://www.societyofrobots.com/
http://www.instructables.com/

Offline superchiku

  • Supreme Robot
  • *****
  • Posts: 952
  • Helpful? 5
  • cooll
Re: my 1st robot (help needed)
« Reply #5 on: March 12, 2008, 02:34:48 PM »
yes photovore may work but how the hell are u going to put out the fire is ur bot going to carry water and a pump

if yes then u have got quite a hell of a job to do especially powering those pumps
JAYDEEP ...

IT AND ROBOTICS ENGINEER

"IN THE END IT DOESNT EVEN MATTER"

Offline ed1380

  • Supreme Robot
  • *****
  • Posts: 1,478
  • Helpful? 3
Re: my 1st robot (help needed)
« Reply #6 on: March 12, 2008, 02:54:06 PM »
*cough*fire extinguisher*cough*  :P
Problems making the $50 robot circuit board?
click here. http://www.societyofrobots.com/robotforum/index.php?topic=3292.msg25198#msg25198

Offline Spoil9

  • Robot Overlord
  • ****
  • Posts: 155
  • Helpful? 1
Re: my 1st robot (help needed)
« Reply #7 on: March 12, 2008, 05:14:09 PM »
Do a Google search for Fire Fighting Robot. There are several comp's accross the states and I assume this is what you are trying to do.
Knowledge is Power. Power Corrupts. Study Hard. Be Evil.

Offline peddiTopic starter

  • Jr. Member
  • **
  • Posts: 9
  • Helpful? 0
Re: my 1st robot (help needed)
« Reply #8 on: March 13, 2008, 12:24:01 AM »
yes photovore may work but how the hell are u going to put out the fire is ur bot going to carry water and a pump

if yes then u have got quite a hell of a job to do especially powering those pumps

carrying water and pump ,made it very hard?! u havent any ideas about it?! its like smth impossible?!

Offline peddiTopic starter

  • Jr. Member
  • **
  • Posts: 9
  • Helpful? 0
Re: my 1st robot (help needed)
« Reply #9 on: March 13, 2008, 01:35:45 AM »
i find smth about photovore on this site,but it is based on photo resistor and infrared,sensors that will work for line tracing and im not sure that this sensors can sense fire or not.r u sure? there isnt any other ways for sensing and finding fire?

Offline Challenger

  • Jr. Member
  • **
  • Posts: 14
  • Helpful? 0
Re: my 1st robot (help needed)
« Reply #10 on: March 13, 2008, 06:20:32 AM »
Maybe a smoke sensor ?

Offline AndrewM

  • Robot Overlord
  • ****
  • Posts: 254
  • Helpful? 0
    • I Am.  When?
Re: my 1st robot (help needed)
« Reply #11 on: March 13, 2008, 07:53:20 AM »
Your looking for something like the TPA81 Thermal Sensor Array, which is pretty expensive (around $115).  Do a google search for suppliers.
blog: www.iamwhen.com
Saving the world from humanity one robot at a time.

Offline AndrewM

  • Robot Overlord
  • ****
  • Posts: 254
  • Helpful? 0
    • I Am.  When?
Re: my 1st robot (help needed)
« Reply #12 on: March 13, 2008, 08:19:23 AM »
For carrying and dispensing water you might want to look at the pumps used in water cooling computer systems.  I would imagine one could be hacked with an H-Bridge or ESC to turn it on and off as needed.
blog: www.iamwhen.com
Saving the world from humanity one robot at a time.

Offline Spoil9

  • Robot Overlord
  • ****
  • Posts: 155
  • Helpful? 1
Re: my 1st robot (help needed)
« Reply #13 on: March 13, 2008, 11:33:43 AM »
Also pond pumps. They have plenty of 6V and 12V low currant pumps that can shoot water straight up a couple of feet.
Knowledge is Power. Power Corrupts. Study Hard. Be Evil.

Offline peddiTopic starter

  • Jr. Member
  • **
  • Posts: 9
  • Helpful? 0
Re: my 1st robot (help needed)
« Reply #14 on: March 13, 2008, 01:20:45 PM »
i dont know,but i dont think that carrying pump is that hard,i think i can find smth small and good for carrying.
my 1st and biggest problem is sensing that fire.im not sure that smoke works or not but a sensitive sensor for sensing heat or light can work.all heat and light sensors that i know are havnt that quality and ability for sensing fire from distance.i should search more about it  ::)


i also have another idea,i mean one of my friends told me look for the tecnologi of infrared cams.it can work but i think it is too expensive.do u know smth about infrared cams?


no one here doesnt work in this field?i mean that there isnt anybody that made smth fire fighter???

thanks


 


Get Your Ad Here

data_list