# Imaging/Focusing Microscope Objectives, Oil Immersion

- Infinity-Corrected Microscope Objectives for UV, Visible, and NIR
- Designed for Oil Immersion Medium Applications
- Magnifications Ranging from 40X to 100X

RMS100X-O

100X Plan Achromat

RMS100X-PFOD

100X Plan Fluorite

N100X-PFO

100X Plan Fluorite

MOIL-30

Immersion Oil

**Related Items**

Please Wait

Objective Lens Selection Guide |
---|

Objectives |

Super Apochromatic Microscope Objectives Microscopy Objectives, Dry Microscopy Objectives, Oil Immersion Physiology Objectives, Water Dipping or Immersion Phase Contrast Objectives Long Working Distance Objectives Reflective Microscopy Objectives UV Focusing Objectives VIS and NIR Focusing Objectives |

Scan Lenses and Tube Lenses |

Scan Lenses F-Theta Scan Lenses Infinity-Corrected Tube Lenses |

### Did You Know?

Multiple optical elements, including the microscope objective, tube lens, and eyepieces, together define the magnification of a system. See the *Magnification & FOV* tab to learn more.

Click for Details

Example of an Oil Immersion Objective Design

(See

*Objective Tutorial*Tab for More Information About Microscope Objective Types)

Thorlabs offers oil immersion objective designs from Olympus and Nikon. The majority of the objectives are plan fluorite objectives, while one (RMS100X-O) is a plan achromat design. For details about the differences between these types of objectives, please see the *Objective Tutorial* tab above.

These microscope objectives should be used in applications like traditional and multiphoton microscopy and confocal imaging and are suitable for a variety of imaging modalities, including epi-illumination, oblique illumination, brightfield, and DIC applications. These infinity-corrected objectives have optical elements with an ultra-wide broadband AR coating, designed for use with either 180 mm or 200 mm focal length tube lenses.

The Olympus objectives on this page have RMS (0.800"-36) threading, and the Nikon objective has M25 x 0.75 threading. To use these objectives with a different thread standard, please see our microscope objective thread adapters. When choosing a microscope objective, it is important to keep in mind that objectives are often designed to integrate with a particular manufacturer's microscopes and are not necessarily interchangeable due to tube length differences and variations in thread pitch or diameter. Please note that the performance of each objective may vary from the engraved specifications when integrated with components and systems from different manufacturers. See the *Magnification and FOV* tab for more information.

All objectives featured on this page are compatible with our microscope nosepiece modules for DIY Cerna^{®} systems, which accept RMS, M25 x 0.75, or M32 x 0.75 objective threading.

Oil-Imersion Objectives | ||||||
---|---|---|---|---|---|---|

Item # | RMS40X-PFO | RMS60X-PFOD | RMS100X-PFO^{a}^{} |
RMS100X-PFOD | RMS100X-O | N100X-PFO^{a} |

Manufacturer |
Olympus | Nikon | ||||

Manufacturer Part # |
1-U2B530 | 1-U2B532 | 1-U2B5352 | 1-U2B5362 | 1-U2B235 | MRH01902 |

Magnification |
40X | 60X | 100X | 100X | 100X | 100X |

Numerical Aperture (NA) |
1.3 | 1.25 - 0.65 | 1.3 | 1.3 - 0.55 | 1.25 | 1.3 |

Effective Focal Length (EFL) |
4.5 mm | 3 mm | 1.8 mm | 1.8 mm | 1.8 mm | 2.0 mm |

Entrance Pupil Diameter^{b} |
11.7 mm | 7.5 - 3.9 mm | 4.7 mm | 4.7 - 2.0 mm | 4.5 mm | 5.2 mm |

Field Number |
26.5 | 26.5 | 26.5 | 26.5 | 22 | N/A |

Working Distance (WD)^{c} |
0.2 mm | 0.12 mm | 0.2 mm | 0.2 mm | 0.15 mm | 0.16 mm |

Parfocal Length^{c} |
45.06 mm | 60 mm | ||||

Compatible Tube Lens Focal Length |
180 mm | 200 mm | ||||

Coverslip Correction |
0.17 mm | - | 0.17 mm | |||

Diameter^{c} |
28 mm | 28 mm | 26 mm | 28 mm | 24 mm | 30 mm |

Length^{c} |
49.4 mm | 49.5 mm | 49.2 mm | 49.3 mm | 49.2 mm | 64.8 mm |

Design Wavelength |
Visible and NIR | Visible | Visible | |||

Threading |
RMS | M25 x 0.75 | ||||

Thread Depth |
4.7 mm | 4.7 mm | 4.5 mm | 4.5 mm | 4.5 mm | 5.1 mm |

### Dimensional Drawing

Chromatic Aberration Correction per ISO Standard 19012-2 | ||
---|---|---|

Objective Class | Common Abbreviations | Axial Focal Shift Tolerances^{a} |

Achromat |
ACH, ACHRO, ACHROMAT | |δ_{C'} - δ_{F'}| ≤ 2 x δ_{ob} |

Semiapochromat (or Fluorite) |
SEMIAPO, FL, FLU | |δ_{C'} - δ_{F'}| ≤ 2 x δ_{ob}|δ _{F'} - δ_{e}| ≤ 2.5 x δ_{ob}|δ _{C'} - δ_{e}| ≤ 2.5 x δ_{ob} |

Apochromat |
APO | |δ_{C'} - δ_{F'}| ≤ 2 x δ_{ob}|δ _{F'} - δ_{e}| ≤ δ_{ob}|δ _{C'} - δ_{e}| ≤ δ_{ob} |

Super Apochromat |
SAPO | See Footnote b |

## Parts of a Microscope Objective

Click on each label for more details.

This microscope objective serves only as an example. The features noted above with an asterisk may not be present on all objectives; they may be added, relocated, or removed from objectives based on the part's needs and intended application space.

### Objective Tutorial

This tutorial describes features and markings of objectives and what they tell users about an objective's performance.

## Objective Class and Aberration Correction

Objectives are commonly divided by their class. An objective's class creates a shorthand for users to know how the objective is corrected for imaging aberrations. There are two types of aberration corrections that are specified by objective class: field curvature and chromatic aberration.

Field curvature (or Petzval curvature) describes the case where an objective's plane of focus is a curved spherical surface. This aberration makes widefield imaging or laser scanning difficult, as the corners of an image will fall out of focus when focusing on the center. If an objective's class begins with "Plan", it will be corrected to have a flat plane of focus.

Images can also exhibit chromatic aberrations, where colors originating from one point are not focused to a single point. To strike a balance between an objective's performance and the complexity of its design, some objectives are corrected for these aberrations at a finite number of target wavelengths.

The four common objective classes are shown in the table to the right; only three are defined under the International Organization for Standards *ISO 19012-2: Microscopes -- Designation of Microscope Objectives -- Chromatic Correction*.

## Immersion Methods

Click on each image for more details.

Objectives can be divided by what medium they are designed to image through. Dry objectives are used in air; whereas dipping and immersion objectives are designed to operate with a fluid between the objective and the front element of the sample.

Glossary of Terms | |
---|---|

Back Focal Length and Infinity Correction |
The back focal length defines the location of the intermediate image plane. Most modern objectives will have this plane at infinity, known as infinity correction, and will signify this with an infinity symbol (∞). Infinity-corrected objectives are designed to be used with a tube lens between the objective and eyepiece. Along with increasing intercompatibility between microscope systems, having this infinity-corrected space between the objective and tube lens allows for additional modules (like beamsplitters, filters, or parfocal length extenders) to be placed in the beam path. Note that older objectives and some specialty objectives may have been designed with finite back focal lengths. In their inception, finite back focal length objectives were meant to interface directly with the objective's eyepiece. |

Entrance Aperture |
This measurement corresponds to the appropriate beam diameter one should use to allow the objective to function properly.Entrance Aperture = 2 × NA × Effective Focal Length |

Field Number and Field of View |
The field number corresponds to the diameter of the field of view in object space (in millimeters) multiplied by the objective's magnification.Field Number = Field of View Diameter × Magnification |

Magnification |
The magnification (M) of an objective is the lens tube focal length (L) divided by the objective's effective focal length (F). Effective focal length is sometimes abbreviated EFL: M = L / EFL .The total magnification of the system is the magnification of the objective multiplied by the magnification of the eyepiece or camera tube. The specified magnification on the microscope objective housing is accurate as long as the objective is used with a compatible tube lens focal length. Objectives will have a colored ring around their body to signify their magnification. This is fairly consistent across manufacturers; see the Parts of a Microscope section for more details. |

Numerical Aperture (NA) |
Numerical aperture, a measure of the acceptance angle of an objective, is a dimensionless quantity. It is commonly expressed as:NA = nwhere θ_{i} × sinθ_{a}_{a} is the maximum 1/2 acceptance angle of the objective, and n_{i} is the index of refraction of the immersion medium. This medium is typically air, but may also be water, oil, or other substances. |

Working Distance |
The working distance, often abbreviated WD, is the distance between the front element of the objective and the top of the specimen (in the case of objectives that are intended to be used without a cover glass) or top of the cover glass, depending on the design of the objective. The cover glass thickness specification engraved on the objective designates whether a cover glass should be used. |

When viewing an image with a camera, the system magnification is the product of the objective and camera tube magnifications. When viewing an image with trinoculars, the system magnification is the product of the objective and eyepiece magnifications.

Manufacturer | Tube Lens Focal Length |
---|---|

Leica | f = 200 mm |

Mitutoyo | f = 200 mm |

Nikon | f = 200 mm |

Olympus | f = 180 mm |

Thorlabs | f = 200 mm |

Zeiss | f = 165 mm |

### Magnification and Sample Area Calculations

## Magnification

The magnification of a system is the multiplicative product of the magnification of each optical element in the system. Optical elements that produce magnification include objectives, camera tubes, and trinocular eyepieces, as shown in the drawing to the right. It is important to note that the magnification quoted in these products' specifications is usually only valid when all optical elements are made by the same manufacturer. If this is not the case, then the magnification of the system can still be calculated, but an effective objective magnification should be calculated first, as described below.

To adapt the examples shown here to your own microscope, please use our Magnification and FOV Calculator, which is available for download by clicking on the red button above. Note the calculator is an Excel spreadsheet that uses macros. In order to use the calculator, macros must be enabled. To enable macros, click the "Enable Content" button in the yellow message bar upon opening the file.

*Example 1: Camera Magnification*

When imaging a sample with a camera, the image is magnified by the objective and the camera tube. If using a 20X Nikon objective and a 0.75X Nikon camera tube, then the image at the camera has 20X × 0.75X = 15X magnification.

*Example 2: Trinocular Magnification*

When imaging a sample through trinoculars, the image is magnified by the objective and the eyepieces in the trinoculars. If using a 20X Nikon objective and Nikon trinoculars with 10X eyepieces, then the image at the eyepieces has 20X × 10X = 200X magnification. Note that the image at the eyepieces does not pass through the camera tube, as shown by the drawing to the right.

## Using an Objective with a Microscope from a Different Manufacturer

Magnification is not a fundamental value: it is a derived value, calculated by assuming a specific tube lens focal length. Each microscope manufacturer has adopted a different focal length for their tube lens, as shown by the table to the right. Hence, when combining optical elements from different manufacturers, it is necessary to calculate an *effective* magnification for the objective, which is then used to calculate the magnification of the system.

The effective magnification of an objective is given by Equation 1:

(Eq. 1) |

Here, the Design Magnification is the magnification printed on the objective, *f*_{Tube Lens in Microscope} is the focal length of the tube lens in the microscope you are using, and *f*_{Design Tube Lens of Objective} is the tube lens focal length that the objective manufacturer used to calculate the Design Magnification. These focal lengths are given by the table to the right.

Note that Leica, Mitutoyo, Nikon, and Thorlabs use the same tube lens focal length; if combining elements from any of these manufacturers, no conversion is needed. Once the effective objective magnification is calculated, the magnification of the system can be calculated as before.

*Example 3: Trinocular Magnification (Different Manufacturers)*

When imaging a sample through trinoculars, the image is magnified by the objective and the eyepieces in the trinoculars. This example will use a 20X Olympus objective and Nikon trinoculars with 10X eyepieces.

Following Equation 1 and the table to the right, we calculate the effective magnification of an Olympus objective in a Nikon microscope:

The effective magnification of the Olympus objective is 22.2X and the trinoculars have 10X eyepieces, so the image at the eyepieces has 22.2X × 10X = 222X magnification.

## Sample Area When Imaged on a Camera

When imaging a sample with a camera, the dimensions of the sample area are determined by the dimensions of the camera sensor and the system magnification, as shown by Equation 2.

(Eq. 2) |

The camera sensor dimensions can be obtained from the manufacturer, while the system magnification is the multiplicative product of the objective magnification and the camera tube magnification (see Example 1). If needed, the objective magnification can be adjusted as shown in Example 3.

As the magnification increases, the resolution improves, but the field of view also decreases. The dependence of the field of view on magnification is shown in the schematic to the right.

*Example 4: Sample Area*

The dimensions of the camera sensor in Thorlabs' 1501M-USB Scientific Camera are 8.98 mm × 6.71 mm. If this camera is used with the Nikon objective and trinoculars from Example 1, which have a system magnification of 15X, then the image area is:

## Sample Area Examples

The images of a mouse kidney below were all acquired using the same objective and the same camera. However, the camera tubes used were different. Read from left to right, they demonstrate that decreasing the camera tube magnification enlarges the field of view at the expense of the size of the details in the image.

Posted Comments: | |

Philip Binner
(posted 2020-10-30 13:27:24.633)1.25-0.65 NA
I am confused by the notation of this ^. Does this mean the numerical aperture can take on any value between 0.65 and 1.25? YLohia
(posted 2020-10-30 02:08:32.0)Thank you for contacting Thorlabs. The -PFOD objectives have built-in irises that allow for the effective NA to be changed between the specified values (for example, between 0.65 and 1.25). |

- Oil Immersion Objectives for NIR and Visible Light
- Infinity-Corrected Plan Fluorite or Plan Achromat Designs
- Iris Diaphragm for Darkfield Microscopy on RMS60X-PFOD and RMS100X-PFOD
- RMS (0.800"-36) Threading
- Designed for a Tube Lens Focal Length of 180 mm
- 45.06 mm Parfocal Length

These objectives provide 40X, 60X, or 100X magnification, flat images across the entire visible spectrum, high numerical aperture values, and excellent resolution. The RMS40X-PFO, RMS50X-PFOD, RMS100X-PFO, and RMS100X-POFD are plan fluorite designs, while the RMS100X-O is a plan achromat design. The differences between these designs can be found in the *Objective Tutorial* tab.

All of these objectives are suitable for brightfield microscopy, and all but the RMS100X-O are suitable for DIC microscopy. Additionally, the RMS60X-PFOD and RMS100X-PFOD objectives feature a built-in iris diaphragm, which is designed to be partially closed during darkfield microscopy in order to preserve the darkness of the background. This is absolutely necessary for high numerical aperture (above NA = 1.2) oil immersion objectives when using an oil immersion darkfield condenser. For ordinary brightfield observations, the iris diaphragm should be left fully open. The iris diaphragm adjustment is pictured above and to the right.

These objectives use standard RMS threading. To use these objectives with a different thread standard, please see our RMS Thread Adapters.

Objective manufacturers recommend using immersion oils from the same manufacturer for best performance; Thorlabs offers a variety of immersion oils below. A protective cap is also available for these objectives; see below for details.

- Oil Immersion Objectives for the Visible Spectrum
- Infinity-Corrected, Plan Fluorite Design
- Ideal for High-NA Imaging
- M25 x 0.75 Threading
- Designed for a Tube Lens Focal Length of 200 mm
- 60 mm Parfocal Length

This objective provides 100X magnification, features high transmission, particularly at UV wavelengths, and produces flat images across the field of view, making this objective well suited for use in laser scanning microscopy. It is designed for DIC microscopy, but can also be utilized for brightfield microscopy, fluorescence, and polarized light microscopy. The high NA of this objective also makes it suitable for Optical Tweezer applications. These objectives use M25 x 0.75 threading, which can be converted to other thread standards using Thorlabs' selection of M25 x 0.75 adapters.

This objective is designed for use from -18 °C to 60 °C (0 °F to 140 °F) and is not recommended for use at extreme temperatures. Objective manufacturers recommend using immersion oils from the same manufacturer for best performance; Thorlabs offers a variety of immersion oils below.

- Oils for Use with Oil Immersion Objectives
- Very Low Autofluorescence Oils are Optimized for Fluorescence Microscopy
- Non-Drying and Polychlorinated Biphenyl (PCB) Free

These Microscope Immersion Oils are designed for use with Oil Immersion Microscope Objectives. Placing an oil medium between the front surface of the objective and the cover glass allows the objective to achieve a high numerical aperture, maximizing light collection by the objective. To minimize refraction of light from the sample, the refractive indices of immersion oils are very close to those of cover glass.

Immersion oils are available with low or very low autofluorescence. Autofluorescence is the natural fluorescence emission of the oil when exposed to light. Each immersion oil has a different level of background emission, which either increases or decreases the contrast of the image; oils with very low autofluorescence are optimized for use in sensitive or UV fluorescence microscopy applications.

To clean immersion objectives after use with immersion oils, use a soft optical cleaning tissue such as our MC-5 premium lens tissues.

Item # | MOIL-30 | MOIL-20LN | OILCL30 | MOIL-10LF | ||
---|---|---|---|---|---|---|

Refractive Index^{a} |
1.518 at 546.1 nm | |||||

Abbe Number^{a }(at 546.1 nm) |
40.8 | 42.1 | 41 | 45.8 | ||

Type |
Olympus Type F | Leica Type N | Cargille Type LDF | Leica Type F | ||

Viscosity^{a,b} |
450 mm^{2}/s |
825 mm^{2}/s |
500 mm^{2}/s |
435 mm^{2}/s |
||

Autofluorescence |
Low | Low | Very Low | Very Low | ||

Volume |
30 mL / 28 g | 20 mL | 30 mL | 10 mL |

Isael Herrera(posted 2021-05-24 18:58:33.007)YLohia(posted 2021-05-27 03:04:31.0)