Author Topic: could i make a helicoptor out of this?  (Read 8993 times)

0 Members and 1 Guest are viewing this topic.

Offline SmAsHTopic starter

  • Supreme Robot
  • *****
  • Posts: 3,959
  • Helpful? 75
  • SoR's Locale Electronics Nut.
could i make a helicoptor out of this?
« on: January 16, 2008, 03:55:57 AM »
ive been dying to make an rc helicoptor...theres this cheap $10 aus rc car would it work to make a chasi and put the insides of the car into it? heres the link to the car
http://www.wowwicked.com.au/catalogue.php?p=22 would this work?
Howdy

Offline airman00

  • Contest Winner
  • Supreme Robot
  • ****
  • Posts: 3,650
  • Helpful? 21
  • narobo.com
    • Narobo.com - Mechatronics and related
Re: could i make a helicoptor out of this?
« Reply #1 on: January 16, 2008, 06:21:24 AM »
helicopters are pretty hard to make from scratch  :-\

yes you can use the r/c controller from the car but not the motors.
You need to calculate the torque of the motor and the rotor width.
Check out the Roboduino, Arduino-compatible board!


Link: http://curiousinventor.com/kits/roboduino

www.Narobo.com

paulstreats

  • Guest
Re: could i make a helicoptor out of this?
« Reply #2 on: January 16, 2008, 06:27:39 AM »
I shouldnt think that you could use anything but the transmitter/receiver, and even then its unlikely to have enough channels for a helicopter (you need at least 3. 1 for up/down. 1 for turn left/right. 1 for forward/backward)


Offline SmAsHTopic starter

  • Supreme Robot
  • *****
  • Posts: 3,959
  • Helpful? 75
  • SoR's Locale Electronics Nut.
Re: could i make a helicoptor out of this?
« Reply #3 on: January 16, 2008, 03:50:46 PM »
hmm....point taken...but theres a copter that my friend has that has a height control lever on his controller and then one for forward and one for left and right...


~smash
Howdy

Offline Rebelgium

  • Supreme Robot
  • *****
  • Posts: 637
  • Helpful? 0
  • It's called the future ... We like it here
    • orgcrime.net
Re: could i make a helicoptor out of this?
« Reply #4 on: January 16, 2008, 03:56:41 PM »
making your own helicopter is advanced stuff.
Don't
To relax after some hard work on robotics: A very fun free online text based MMORPG
orgcrime.net

Offline SmAsHTopic starter

  • Supreme Robot
  • *****
  • Posts: 3,959
  • Helpful? 75
  • SoR's Locale Electronics Nut.
Re: could i make a helicoptor out of this?
« Reply #5 on: January 16, 2008, 04:03:51 PM »
yea ur right ill just mod one with lights :D
Howdy

paulstreats

  • Guest
Re: could i make a helicoptor out of this?
« Reply #6 on: January 16, 2008, 06:58:42 PM »
Quote
hmm....point taken...but theres a copter that my friend has that has a height control lever on his controller and then one for forward and one for left and right...




He probably does have a controller with 3 channels on it. But unless im mistaken, you were asking if you could use parts from a cheap $10 radio controlled car. The car will not have a 3 channel remote I guarantee it, I would even be surprised if the remote control unit operates with pots most likely it will just be metal plates giving only the option of full speeds or no speeds. Totally useless for a helicopter

Offline ed1380

  • Supreme Robot
  • *****
  • Posts: 1,478
  • Helpful? 3
Re: could i make a helicoptor out of this?
« Reply #7 on: January 16, 2008, 07:14:38 PM »
for a heli you need at least 3 or 4 channels. 3 channels if you plan on having a gyro on it and 4 if you gonna try to do it yourself
Problems making the $50 robot circuit board?
click here. http://www.societyofrobots.com/robotforum/index.php?topic=3292.msg25198#msg25198

Offline maverick monk

  • Robot Overlord
  • ****
  • Posts: 204
  • Helpful? 0
Re: could i make a helicoptor out of this?
« Reply #8 on: January 16, 2008, 07:37:07 PM »
helicopters are pretty hard to make from scratch  :-\

yes you can use the r/c controller from the car but not the motors.
You need to calculate the torque of the motor and the rotor width.

you engineers and your calculating  ::)

if you are that much of a cheap!@# you COULD get rotors, take the motor and put it on a gear reduction unit with adjustable pinions,if your motor hits full rpm and seems like it could go faster, use a higher pinion, if the motor is getting too hot, use a lower pinion, however, this thing WONT stay level on any of the 3 axis, you need a balence and control system for that, a tail rotor, and either a coaxial blade or a variable pitch mechanism... all in all, save up 200$ and buy yourself a nice electric rc helicopter

Offline SmAsHTopic starter

  • Supreme Robot
  • *****
  • Posts: 3,959
  • Helpful? 75
  • SoR's Locale Electronics Nut.
Re: could i make a helicoptor out of this?
« Reply #9 on: January 16, 2008, 08:20:56 PM »
awww how am i gonna get $200? anyway i'd rather spend that $200 on my own robotics ;D
Howdy

Offline Admin

  • Administrator
  • Supreme Robot
  • *****
  • Posts: 11,703
  • Helpful? 173
    • Society of Robots
Re: could i make a helicoptor out of this?
« Reply #10 on: January 20, 2008, 05:38:25 PM »
SmAsH . . . you should focus on just one robot idea at a time . . . I see too many of yours in the forum ;)


Quote
you engineers and your calculating
saves me tons of time and money ;)
its a bit hard to do at first . . . so thats why I made the calculator tutorials for you guys to use . . .

Offline frank26080115

  • Supreme Robot
  • *****
  • Posts: 322
  • Helpful? 2
Re: could i make a helicoptor out of this?
« Reply #11 on: January 20, 2008, 06:33:49 PM »
Ironically, a quadrotor copter would probably be easier to build since you don't need the cyclic control mechanisms. But lets see if you can afford 3 gyros and 2 accelerometers plus 4 brushless motors with motor controllers.

Offline airman00

  • Contest Winner
  • Supreme Robot
  • ****
  • Posts: 3,650
  • Helpful? 21
  • narobo.com
    • Narobo.com - Mechatronics and related
Re: could i make a helicoptor out of this?
« Reply #12 on: January 20, 2008, 06:41:05 PM »
Ironically, a quadrotor copter would probably be easier to build since you don't need the cyclic control mechanisms. But lets see if you can afford 3 gyros and 2 accelerometers plus 4 brushless motors with motor controllers.

lol
 I dont think a 12 year old can afford all that  :o
Check out the Roboduino, Arduino-compatible board!


Link: http://curiousinventor.com/kits/roboduino

www.Narobo.com

Offline SmAsHTopic starter

  • Supreme Robot
  • *****
  • Posts: 3,959
  • Helpful? 75
  • SoR's Locale Electronics Nut.
Re: could i make a helicoptor out of this?
« Reply #13 on: January 20, 2008, 07:52:05 PM »
lol i normally get $10 a week and i work for my friends dad (at the factory) and he give me like $20-$40 an hour. and i get to keep a whole heap of free stuff...about $100-$300 of free stuff! ;) u just got smashed!


~smash
Howdy

Offline airman00

  • Contest Winner
  • Supreme Robot
  • ****
  • Posts: 3,650
  • Helpful? 21
  • narobo.com
    • Narobo.com - Mechatronics and related
Re: could i make a helicoptor out of this?
« Reply #14 on: January 20, 2008, 07:54:41 PM »
he give me like $20-$40 an hour. and i get to keep a whole heap of free stuff...about $100-$300 of free stuff! ;) u just got smashed!


~smash

really 20 to 40 bucks an hour????? Thats a lot of money man , work 20 hours a week after school and thats 400 - 800 bucks a week!!!!!
plus 100-300 bucks!!!!

is this a bit of an exaggeration smash ?
Check out the Roboduino, Arduino-compatible board!


Link: http://curiousinventor.com/kits/roboduino

www.Narobo.com

Offline SmAsHTopic starter

  • Supreme Robot
  • *****
  • Posts: 3,959
  • Helpful? 75
  • SoR's Locale Electronics Nut.
Re: could i make a helicoptor out of this?
« Reply #15 on: January 20, 2008, 07:56:46 PM »
no! last week he through out 1 computer and two office phones! and a whole heap of cables and cords.


~smash
Howdy

paulstreats

  • Guest
Re: could i make a helicoptor out of this?
« Reply #16 on: January 20, 2008, 08:20:15 PM »
Quote
lol i normally get $10 a week and i work for my friends dad (at the factory) and he give me like $20-$40 an hour. and i get to keep a whole heap of free stuff...about $100-$300 of free stuff!  u just got smashed!


reeeeeeaaaaaaalllllllyyyyy

Here Is A Quote Taken From Your Very Own Website


Quote
but i am running into a lot of trouble with funding and finding the right parts......               i am trying to keep my robot making up by selling some of my other things that i have lying around my house...

Offline airman00

  • Contest Winner
  • Supreme Robot
  • ****
  • Posts: 3,650
  • Helpful? 21
  • narobo.com
    • Narobo.com - Mechatronics and related
Re: could i make a helicoptor out of this?
« Reply #17 on: January 20, 2008, 08:25:04 PM »
smash NOT AGAIN!!!!

this is getting to be very annoying!!!!     >:(


smash your comments are a bit like this sign

Check out the Roboduino, Arduino-compatible board!


Link: http://curiousinventor.com/kits/roboduino

www.Narobo.com

Offline ed1380

  • Supreme Robot
  • *****
  • Posts: 1,478
  • Helpful? 3
Re: could i make a helicoptor out of this?
« Reply #18 on: January 20, 2008, 08:28:43 PM »
no! last week he through out 1 computer and two office phones! and a whole heap of cables and cords.


~smash
time for another pic

Problems making the $50 robot circuit board?
click here. http://www.societyofrobots.com/robotforum/index.php?topic=3292.msg25198#msg25198

Offline Dr_Worm

  • Jr. Member
  • **
  • Posts: 19
  • Helpful? 0
Re: could i make a helicoptor out of this?
« Reply #19 on: January 20, 2008, 08:40:51 PM »
I don't want to hijack this thread but do you really need 4 gyros and 2 accelerometers for a Quadricopter? Also couldn't you just use 4 'helicopter' servos from servo city?

Offline airman00

  • Contest Winner
  • Supreme Robot
  • ****
  • Posts: 3,650
  • Helpful? 21
  • narobo.com
    • Narobo.com - Mechatronics and related
Re: could i make a helicoptor out of this?
« Reply #20 on: January 20, 2008, 08:44:50 PM »
I don't want to hijack this thread but do you really need 4 gyros and 2 accelerometers for a Quadricopter? Also couldn't you just use 4 'helicopter' servos from servo city?

lol I forgot this thread was about copters


you need gyros for balancing the heli on each corner so you know how much thrust each propeller must be giving , 4 helicopter servos ... maybe gotta calculate the rotor length etc. before building a heli, and i doubt smash will make this heli



OMG ed I was cracking up,  you know what , ed we need a webpage or thread devoted to all this funny pics we have posted in response to Smash's comments, so it will be available for any other memeber who would like to use a pic to prove a point , lol.
Check out the Roboduino, Arduino-compatible board!


Link: http://curiousinventor.com/kits/roboduino

www.Narobo.com

paulstreats

  • Guest
Re: could i make a helicoptor out of this?
« Reply #21 on: January 20, 2008, 08:52:57 PM »
you could probably do with 1 3d accelerometer and 2 gyros (you can get 1 accelerometer and 1 gyro built into the same package).

2 gyros mounted at the center of the heli can do the same as 1 on each corner.

Another idea to reduce costs would be a tri - rotor system in the shape of a triangle

Offline SmAsHTopic starter

  • Supreme Robot
  • *****
  • Posts: 3,959
  • Helpful? 75
  • SoR's Locale Electronics Nut.
Re: could i make a helicoptor out of this?
« Reply #22 on: January 20, 2008, 09:10:09 PM »
no what i meant in the previous post was that hes throwing out computers. i never said i got any! and besides this weekend was the first time i freakin worked there! also there are very little parts i can harvest from a pc....before this weekend i was only getting like $7 a week us ($10 aus)
Howdy

Offline airman00

  • Contest Winner
  • Supreme Robot
  • ****
  • Posts: 3,650
  • Helpful? 21
  • narobo.com
    • Narobo.com - Mechatronics and related
Re: could i make a helicoptor out of this?
« Reply #23 on: January 20, 2008, 09:12:10 PM »
also there are very little parts i can harvest from a pc....before this weekend i was only getting like $7 a week us ($10 aus)

that is totally wrong!!!! connectors , every passive component you could imagine ,and you could sell RAM online, hardrives online , etc.   
with one computer I scavengede, I have taken so many connectors and SOOOO many sockets and capacitors, and switches, etc.


what happened to 20- 40 bucks an hour?
Check out the Roboduino, Arduino-compatible board!


Link: http://curiousinventor.com/kits/roboduino

www.Narobo.com

Offline ed1380

  • Supreme Robot
  • *****
  • Posts: 1,478
  • Helpful? 3
Re: could i make a helicoptor out of this?
« Reply #24 on: January 20, 2008, 09:42:16 PM »
same thing here airman. alot of male header pins


Quote
OMG ed I was cracking up,  you know what , ed we need a webpage or thread devoted to all this funny pics we have posted in response to Smash's comments, so it will be available for any other memeber who would like to use a pic to prove a point , lol.

just go to my photobucket. theres bunch of pics like these. viewer discretion advised though. and 56k beware
http://s43.photobucket.com/albums/e398/RussianCommy/cool%20pics/
« Last Edit: January 20, 2008, 09:51:52 PM by ed1380 »
Problems making the $50 robot circuit board?
click here. http://www.societyofrobots.com/robotforum/index.php?topic=3292.msg25198#msg25198

Offline SmAsHTopic starter

  • Supreme Robot
  • *****
  • Posts: 3,959
  • Helpful? 75
  • SoR's Locale Electronics Nut.
Re: could i make a helicoptor out of this?
« Reply #25 on: January 20, 2008, 09:50:48 PM »
i got $40 for 2 hours yesterday and then went home got my dads credit card bought some stuff and taped $38 to it and said spent $38 heres cash! he was still pissed cause i didnt ask...lol. and omfg i thought the only thing i could get was big caps....and wires. can i get anything useful from a ps1? i have a spare one i can use...went inside it yesterday and all that was useful that i could find was ports, a motor, wires, wire connectors... please help me.         BTW: i also have about 5 broken ps1 controllers ;D


~smash
Howdy

Offline airman00

  • Contest Winner
  • Supreme Robot
  • ****
  • Posts: 3,650
  • Helpful? 21
  • narobo.com
    • Narobo.com - Mechatronics and related
Re: could i make a helicoptor out of this?
« Reply #26 on: January 20, 2008, 09:52:04 PM »
post a new thread Smash  ,  BUT before you do search this forum , there have been many threads devoted to this
Check out the Roboduino, Arduino-compatible board!


Link: http://curiousinventor.com/kits/roboduino

www.Narobo.com

Offline SmAsHTopic starter

  • Supreme Robot
  • *****
  • Posts: 3,959
  • Helpful? 75
  • SoR's Locale Electronics Nut.
Re: could i make a helicoptor out of this?
« Reply #27 on: January 20, 2008, 10:03:24 PM »
thx for the info..(word on the street is smash's snooping around old topics. dont tell anybody ;D )
Howdy

Offline dewme5

  • Jr. Member
  • **
  • Posts: 7
  • Helpful? 0
Re: could i make a helicoptor out of this?
« Reply #28 on: January 24, 2008, 10:48:14 AM »
look at the really cheap helicopters.  you only need 2 controls.  up/down, left/right.  forward is handled by being balanced a little nose heavy, reverse is handled by turning around.  These toys are actually alot of fun for the $15 -$30 US.  For the same price as getting something you have to re-engineer (car), you can buy a finished product that is going to work better for the same money.

Offline maverick monk

  • Robot Overlord
  • ****
  • Posts: 204
  • Helpful? 0
Re: could i make a helicoptor out of this?
« Reply #29 on: January 24, 2008, 03:52:15 PM »
smash, you totaly need adderall
« Last Edit: January 24, 2008, 03:52:59 PM by maverick monk »

 


Get Your Ad Here

data_list