Society of Robots - Robot Forum
Electronics => Electronics => Topic started by: GrooveHolmes on November 26, 2010, 11:49:16 PM
-
Just dusting off my Axon2 and am receiving this error upon programming my hex file to the flash.
I've gone through the options, and I can't see anything obviously wrong. Ideas? Muchos.
-
Whenever I've got this it's just been a simple case of the cable being plugged in wrong, chip plugged in wrong etc.
______
Rob
-
Funny, turns out it was a low battery to the Axon. My bad! :)