Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: drunkdrive4 on November 28, 2010, 06:14:20 PM

Title: Question on the $50 Robot (ImANewbie)
Post by: drunkdrive4 on November 28, 2010, 06:14:20 PM
Hello I'm new to this forum, and to robots =p, but I'm just wondering for the $50 Robot theres a lot of wired connections between the soldering.

So, if I get a breadboard (I already have 1) how do I make the connections?
Title: Re: Question on the $50 Robot (ImANewbie)
Post by: Soeren on November 29, 2010, 01:31:30 PM
Hi,

A breadboard can be lots of things, an unetched PCB with "islands" added, a Vero matrix- or stripboard or what you're probably referring to, a solderless breadboard (the worst kind IMO).

Whatever you use, the connections have to be made and with a solderless board, you just connect them the same way as you do the components.

(I really don't understand your question though, 'cause if you've already used it, you should know this).