Author Topic: How to check functionality of SERVO MOTORS  (Read 2046 times)

0 Members and 1 Guest are viewing this topic.

Offline yssa22Topic starter

  • Jr. Member
  • **
  • Posts: 8
  • Helpful? 1
How to check functionality of SERVO MOTORS
« on: April 24, 2015, 12:06:08 AM »
Hi Guys!!

How to check the servo motors using simple motors or any..

please nee some help. :'(

Offline mklrobo

  • Supreme Robot
  • *****
  • Posts: 558
  • Helpful? 15
  • From Dream to Design at the speed of Imagination!
Re: How to check functionality of SERVO MOTORS
« Reply #1 on: April 27, 2015, 01:46:04 AM »
 ;) Good question!
I will be addressing this, and other robot necessaties in my post, Analyzing the Axon: Coding, Construction, and Contraptions.
To make sure your motor works the way you need it to, you need to test it with a
microcontroller. I will probably test my servos and stepper motors with a Basic Stamp from Parallax, and then, test the servo/stepper with the Axon II. This would give me
a "rule of thumb" performance of the motor.
Also, the tutorials in the forum are helpful, for more information.
Good Luck!!   ;D ;D ;D

Offline Aswinth Raj

  • Beginner
  • *
  • Posts: 3
  • Helpful? 1
Re: How to check functionality of SERVO MOTORS
« Reply #2 on: September 30, 2015, 04:30:19 AM »
Hi,
You have to use a micro controller to test your servo, I would recommend an arduino 

 


Get Your Ad Here

data_list