Beginners: please read this post and this post before posting to the forum.
0 Members and 1 Guest are viewing this topic.
How do I build something that can hold a microphone and moove it around a little, so I can moove the microphone from the control-room?
What I would do Is get some high torque low speed motors and put them in a square frame. about 4 inches biger than the diameter of a mic. stand then get an aluminium sheet for the top and drill 2 holes and other 2 holes on the mic. stand and then bold them together. If you need help with the design and materials send me an email at: [email protected].
Not to throw added complication at someone building their first robot but....this might be a good application for an omni-directional platform.Here are some links:https://www.youtube.com/watch?v=Z0lUTMBbu9Ahttps://www.youtube.com/watch?v=9GQ0lPGDC1whttp://www.robotshop.com/en/3wd-100mm-omni-directional-kit.htmlIs noise a concern? Most motors/drives are going to produce audible noise.Quote from: Gededyr on July 18, 2014, 06:19:27 AMHow do I build something that can hold a microphone and moove it around a little, so I can moove the microphone from the control-room? Not exactly sure what you are asking for...perhaps you can be a little more specific. Are you wondering what a system to do this would need, looking for ideas, or need help designing and finding specific components?