Society of Robots - Robot Forum

Software => Software => Topic started by: india.robot on December 17, 2008, 12:01:18 PM

Title: communication/control from computer using wireless (ETHERNET)
Post by: india.robot on December 17, 2008, 12:01:18 PM

hi, i want to control my robot from the compuer using the ethernet. what are the things required to achive this??

i want to develope a interface using JAVA. plz help me. thanks. i want to make the communication range of about 3 miles.

if u have any other options for communicating in this range or greater, then please say..

if possible then plz give a technique for camera communicatiion, else i have to attach an external wireless camera and attach its reciver to a TV/PC..

thanks

Title: Re: communication/control from computer using wireless (ETHERNET)
Post by: Iron Man on December 17, 2008, 06:24:41 PM

3 miles is quite a distance.

I've looked into a bit, it depends on the restrictions in your area.

where would this robot be running?

Title: Re: communication/control from computer using wireless (ETHERNET)
Post by: HDL_CinC_Dragon on December 17, 2008, 09:21:12 PM

3 miles? not going to happen unless youre military or have some serious connections with some high up people. Why the need for such long distance? And video transmission at that range will be even more difficult.

Title: Re: communication/control from computer using wireless (ETHERNET)
Post by: india.robot on December 18, 2008, 03:13:11 AM

ok.. no problem.. tell me wat is ur max range?? and how to make the interface in my computer using java and how to communicate with the robot???

thanks

Title: Re: communication/control from computer using wireless (ETHERNET)
Post by: Admin on December 27, 2008, 03:54:58 AM

http://www.societyofrobots.com/robotforum/index.php?topic=6014.0

Title: Re: communication/control from computer using wireless (ETHERNET)
Post by: izua on December 27, 2008, 04:07:18 AM

3 miles, using ethernet? Ain't going to happen. ethernet cable is limited to 100m (well, a lot of stuff limits it, that's the standard value)
Make a wireless network covering a radius of 3 miles, and set up a wireless AP on your robot.