Society of Robots - Robot Forum
Electronics => Electronics => Topic started by: Admin on July 02, 2010, 04:54:25 PM
-
I just bought the CC BEC Pro (http://www.castlecreations.com/products/ccbec.html) and then realized the default output voltage is 5.12V. I need 6V+.
Supposedly I can buy a "Castle Link (http://www.castlecreations.com/products/castle_link.html)" to hook up the regulator by USB to modify the output . . . but I really don't want to spend $25 if I can just send an appropriate command by serial . . .
anyone know?
-
I have asked on a rc forum i frequent
-
silabs
F327
DCNANR
0831 +
Since there is only one data line, I guess Castle used some kind of one-wire protocol with that silabs MCU.