Society of Robots - Robot Forum

General Misc => Robot Videos => Topic started by: cooldog on November 25, 2007, 05:28:48 PM

Title: make your own printed circut board
Post by: cooldog on November 25, 2007, 05:28:48 PM
[youtube=425,350]urv6jArKp6M[/youtube]

really usefll
Title: Re: make your own printed circut board
Post by: airman00 on November 25, 2007, 06:20:28 PM
nice find

thanks cooldog
Title: Re: make your own printed circut board
Post by: paulstreats on November 25, 2007, 06:45:10 PM
dont forget that you can also make a silk screen type layer simply by ironing on a sil screen design after etching...
Title: Re: make your own printed circut board
Post by: dj sures on December 05, 2007, 12:05:51 PM
u know it's much easier to download FreePCB and use http://www.apcircuits.com/ . they're the cheapest and easiest place i found to use . they do the drilling and hole tinning and everything . a decent sized board can cost $10-$15 canadian dollars . and they have a next day shipping .   :)
Title: Re: make your own printed circut board
Post by: Trumpkin on February 24, 2008, 07:53:59 PM
you can make them cheaper tho and it's more fun. ;D
Title: Re: make your own printed circut board
Post by: rargus on March 02, 2008, 04:38:32 PM
http://www.amazon.com/Build-Your-Printed-Circuit-Board/dp/007142783X

A lot of detail on this (and sending the boards out to be made). Uses Eagle which is a pretty good package. I used to make my own but now I just send them off.
Title: Re: make your own printed circut board
Post by: Trumpkin on March 02, 2008, 05:01:32 PM
i'm using eagle right now to try to do the $50 robot board. It kind of bad.
Title: Re: make your own printed circut board
Post by: Abby123 on November 27, 2019, 01:33:43 AM
You can use WellPCB (https://www.wellpcb.com/)'s circuit board to make your robot circuit board. They are holding a $ 5 promotion and it's a great deal!