Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: aaa3a on May 07, 2012, 08:56:45 AM

Title: what type of motor controller is this
Post by: aaa3a on May 07, 2012, 08:56:45 AM

i have this motor controller TB6612FNG like the one in this image
(http://store.fut-electronics.com/photos/573_add.jpg)
(http://store.fut-electronics.com/photos/573.jpg)
in the project designer there is tow types of it 2 pins and 3 pins which one of this is mine

and i'll connect the motor supply voltage from 6v 4AH battery pack and also will supply the vcc for the driver from the same battery after using 5 volt voltage regulator as it recommend 5 volt for vcc and then connect the ground of the battery to the ground of my Axon II is this configuration right or should i use something else

Title: Re: what type of motor controller is this
Post by: aaa3a on May 07, 2012, 09:18:15 AM

if there is a link for demo shows how to connect this motor driver with axon  plz add it

Title: Re: what type of motor controller is this
Post by: Webbot on May 07, 2012, 01:32:58 PM

Quote from: aaa3a on May 07, 2012, 08:56:45 AM

in the project designer there is tow types of it 2 pins and 3 pins which one of this is mine

Both! Just depends on how many controller pins you wanna use - both will work.
RTFM