Society of Robots - Robot Forum

Software => Software => Topic started by: aciq kamariel on October 29, 2011, 12:14:09 AM

Title: need help!
Post by: aciq kamariel on October 29, 2011, 12:14:09 AM
can someone help me on how to programming a servo motor using PIC16F8452 in micro C software.
Title: Re: need help!
Post by: waltr on October 29, 2011, 07:17:47 AM
There are a number of good projects on the web with code on driving a Hobby servo with a PIC.
Google "PIC servo:, "PIC servo controller",  ""PIC servo controller project", "PIC servo controller tutorial" to find them.
Her is one that uses an 18F PIC and is written in C. (

However, most are in assembler and for a different PIC but the technique is the same. You will need to learn enough PIC assembler (see data sheet for assembler Instruction Set) to port the code to C and you will also need to learn the details of the PIC you are using, the PIC16F8452, to properly setup the PIC.

A good starting point for learning how to use and program PICs is here: (