Society of Robots - Robot Forum
General Misc => Robot Videos => Topic started by: fritsl on February 19, 2008, 10:03:08 AM
-
Different locomotion, and building it :)
http://video.google.com/googleplayer.swf?docId=7528701675902650345&hl=en
-
The middle part really proves the value in planning before getting to work :P
-
No, why? On the contrary, I love youst getting into it, hate planning (too much)
:)
-
If you plan, then you always know what to do next and you'll be sure when you're done. You also make like 90% less mistakes if you plan the construction out or something ;)
-
Well... If you plan, you must be able to know what you are planing.
And since I am not using CAD, and laser cut pieces etc.. I just use what I have, the best way I can - well then I cannot plan, only try my way to get things together, and thereby just build, you see.
I cannot plan what to do when I do not know how things fit or does not fit - So I have to just do it = no planning.
Of course I have an idea of what I want, like "the Skiwalker", I thought it would be funny - well - take a look at this page, it should explain the inspiration: http://letsmakerobots.com/node/35
Can I see some of your work, a link?
Fritsl
-
Actually, when thinking about it, I did make a biped in ninth grade. It was just a premade set with one single engine, no intelligence unit and basically just gears that made the two legs move. It's nothing impressive and it sucked. I don't have it anymore I'm afraid.
I'm thinking about getting started doing this stuff, it's really interesting. I've read most tutorials on the site and skimmed the forums.
-
Robot building is fun! I love the moment when it comes to life from just being pieces!
I have made a complete walk through of a project that is more then just "a beginners project", but it will work as a VERY easy beginners project:
http://letsmakerobots.com/node/17
Let me hear if you really is going to build a little project, I am a pretty experienced newbee myself, can help with the basics etc,
you could also do this one, it is only 40$, and only takes an hour or 2, but is highly programmable: http://letsmakerobots.com/node/87
Ciao!
-
I cannot plan what to do when I do not know how things fit or does not fit
sounds like the chicken and the egg problem ;)
-
Exactly, and these are extremely hard to plan your way out of! So .. thats what I said; Its just "do it" ;)
-
I also noticed you're danish, anything useful for roboteers around in Denmark? I happen to live in southern Sweden and can travel there easily (rather going to Denmark than going all the way to the states)
(Sorry for being offtopic :P)
-
Yes, I am Danish. And no, the scene is dead. This is why I am spamming with videos like this to get robot-friends, and force my few danish friends to write in English on our site etc.. all because I have no robo-building friends in Denmark ;) http://video.google.com/googleplayer.swf?docId=-6154034533075077289&hl=en
-
hmm I get the feeling someone edited that last post...
-
Yes, I am Danish. And no, the scene is dead. This is why I am spamming with videos like this to get robot-friends, and force my few danish friends to write in English on our site etc.. all because I have no robo-building friends in Denmark ;) http://video.google.com/googleplayer.swf?docId=-6154034533075077289&hl=en
At least you have a swedish robo-building friend right here! I'm even from Skåne which is very close.
-
at 6:22 is that cock-wheels? :o
pretty cool robot though
-
hmm I get the feeling someone edited that last post...
Ha, no I understand why you get that thought, now I am reading my own post again :) But no, we have no cruel moderator as far as i know of, it was actually me who wrote it, I was just humble - or trying to be humble, in ASCII - because I felt a little bad about having put the "advertisment" for my own site on this site :) (See the video, and you may get me, it is just a robot showing my websites adress)
-
at 6:22 is that cock-wheels?
Well.. erhm.. Ok, what I am trying to say is that you should stay away from the transfer with a piece of string. It works like a piece of s*** ;)
On the very robot´s front, erh.. yes - it IS a cock-wheel.. but.. it is just used as a disc to hold a piece of piano-wire (hard metal) on place to the servo!
Get it? :D Never mind, it is a cock-wheel, but not used as a such! And I recomend them over string!!
-
At least you have a swedish robo-building friend right here! I'm even from Skåne which is very close.
how cool! I just got a private message from another, I think you perhaps are more than you thik over there! We have a small club in Copenhagen, some 20 people all starting building now (and soon entering letsmakerobots.com I hope), drop me a priv message, perhaps we can have some fun!
-
please dont triple post. say everything in one post. if you need there is a modify button on the right.