Author Topic: Question on the $50 Robot (ImANewbie)  (Read 1253 times)

0 Members and 1 Guest are viewing this topic.

Offline drunkdrive4Topic starter

  • Beginner
  • *
  • Posts: 1
  • Helpful? 0
Question on the $50 Robot (ImANewbie)
« on: November 28, 2010, 06:14:20 PM »
Hello I'm new to this forum, and to robots =p, but I'm just wondering for the $50 Robot theres a lot of wired connections between the soldering.

So, if I get a breadboard (I already have 1) how do I make the connections?

Offline Soeren

  • Supreme Robot
  • *****
  • Posts: 4,672
  • Helpful? 227
  • Mind Reading: 0.0
Re: Question on the $50 Robot (ImANewbie)
« Reply #1 on: November 29, 2010, 01:31:30 PM »

A breadboard can be lots of things, an unetched PCB with "islands" added, a Vero matrix- or stripboard or what you're probably referring to, a solderless breadboard (the worst kind IMO).

Whatever you use, the connections have to be made and with a solderless board, you just connect them the same way as you do the components.

(I really don't understand your question though, 'cause if you've already used it, you should know this).

A rather fast and fairly heavy robot with quite large wheels needs what? A lot of power?
Please remember...
Engineering is based on numbers - not adjectives


Get Your Ad Here