Author Topic: Soldering capcitor with 4.8v battery pack  (Read 1248 times)

0 Members and 1 Guest are viewing this topic.

Offline Melcin PowellTopic starter

  • Full Member
  • ***
  • Posts: 61
  • Helpful? 0
Soldering capcitor with 4.8v battery pack
« on: February 04, 2011, 03:13:16 PM »
I had an earlier post about this but that was a while ago so sorry for double posting, but anyways i was wondering if i keep the connection for the three pin male header and the capacitor or just the power bus and the positive lead of the capacitor are connected?

« Last Edit: February 04, 2011, 03:55:37 PM by Melcin Powell »

Offline want2learn

  • Robot Overlord
  • ****
  • Posts: 189
  • Helpful? 4
Re: Soldering capcitor with 4.8v battery pack
« Reply #1 on: February 04, 2011, 04:04:50 PM »
Is that the $50 robot board?
If it's a large capacitor meant to help with brown outs then just solder it across the +ve and -ve supply lines on your board (repecting polarity). Soldering it to the bottom of the board where the battery connects to will be sufficient.

The question that drives me hazy:

Am I, or the others crazy?


Get Your Ad Here