Author Topic: HS-311 servo?  (Read 1859 times)

0 Members and 1 Guest are viewing this topic.

Offline maine2Topic starter

  • Beginner
  • *
  • Posts: 4
  • Helpful? 0
HS-311 servo?
« on: April 01, 2009, 04:42:03 PM »
Okay, I have a question...please be patient with me because I have no experience with this stuff :-[.  I just got the servo's in the mail today for the $50 robot.  I am eager to attempt to the modification but the tutorial says it need to be hooked up to the microcontroller.  So do I need to wait until I put together the little board complete with the ATmega8 AVR and the AVR STK serial port dongle programmer before I can modify?  Is that how they get their power?  Or do they get powered by the 9V battery??  Sorry, I'm just a little confused ???...And thank you all in advance.

Offline offy

  • Supreme Robot
  • *****
  • Posts: 340
  • Helpful? 1
Re: HS-311 servo?
« Reply #1 on: April 01, 2009, 05:11:24 PM »
First you need to have the microcontroller built, if you do it admins way of modifaction. If you MUST modify now, you can do it the way I do it.


you need 2.2k OHM resistors.

I like doing it this way because it always works. With gluing you could be off a little and mess up.


Get Your Ad Here