Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: little-c on April 04, 2010, 03:36:45 AM

Title: designing cuircits on perfboard
Post by: little-c on April 04, 2010, 03:36:45 AM

right first things first, perfboard, sheet with .1inch spaced holes and long rows of copper strips.

this stuff is quite useful. but most of the curcits I make have a habit of getting very complicated when they run out of space. so, does anyone know of software that can be used to design curcits on this stuff, or a good method of designing curcits?

Title: Re: designing cuircits on perfboard
Post by: SmAsH on April 04, 2010, 07:05:14 AM

Uhh, use eagle and set the grid to .1"?

Title: Re: designing cuircits on perfboard
Post by: Soeren on April 04, 2010, 09:23:55 AM

Hi,

There is plenty of packages for Vero layout, just Google it.

I cannot vouch for any of them, as I prefer paper_and_pencil_CAD when I use Vero stripboard (if any at all), but each to his own :)