Society of Robots - Robot Forum
General Misc => Misc => Topic started by: SmAsH on June 12, 2010, 07:50:23 PM
-
Hey guys, my robotics has seized for a fair while as ive gotten more into computing and gaming as such, my robotics has come to a halt for a while and my junk has been sitting there for a while unused and most of it brand new! So, if anybody wants some of my crap, make me an offer!!
I really need to pick up some cash as my major electronics project is approaching fast and I'm broke :)
Other Stuff I Found Today:
3x PIC18F67J50
3x TPS63002DRCR - Texas Instruments
3x TPS61202DRCTG4 - Texas Instruments
2x PCA9538DBR - Texas Instruments
2x TPA152DR - Texas Instruments
30x DPDT Slide Switch http://i46.tinypic.com/2q2o4na.jpg (http://i46.tinypic.com/2q2o4na.jpg)
Here's the crap:
BRAND NEW - UNOPENED.
4x PIC18F252 - DIP
3x PIC18F258 - DIP
3x PIC18F2585 - DIP
2x ATmega32-16AU 16MHz -SMD.
3x Breakout board for MEGA32.
2x ATtiny2313 20MHz 20 pin mc - DIP.
1x CP2102 USB to UART Bridge.
5x 16MHz crystal - DIP.
2x 8MHz crystal - DIP.
2x L298 motor controller ic.
4x Max232 thru-hole.
5m of 10core rainbow ribbon cable.
2x HS-311 servos.
8x LM7805's
Header pins
13x Aluminum standoffs 30mm long - 20mm+10mm thread.
Other Hardware:
1x Roboduino, has sat in its box for a fair while. Used once or twice to center servos, other than that, new.
Comes with cable and roboduino.
6x Servos - one or two has been plugged in once or twice, other than that, they are new.
2x Servos - Modified for 360 rotation.
1x Unknown servo, out of case, don't know if it works, comes with all parts, gears etc...
All servos above are these ones http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX0929&P=7 (http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX0929&P=7)
"Airtronics 94102Z Standard Heavy Duty Servo"
Servos come with heaps of mounting hardware so just ask for what you want :)
Pictures:
6x Servos: http://i46.tinypic.com/mrv8le.jpg (http://i46.tinypic.com/mrv8le.jpg)
Grommets and Screws: http://i45.tinypic.com/219ubs3.jpg (http://i45.tinypic.com/219ubs3.jpg)
Broken servo: http://i47.tinypic.com/s6udec.jpg (http://i47.tinypic.com/s6udec.jpg)
Assorted horns: http://i45.tinypic.com/30mmzit.jpg (http://i45.tinypic.com/30mmzit.jpg)
Servo mounts: http://i48.tinypic.com/33yl6jn.jpg (http://i48.tinypic.com/33yl6jn.jpg)
HS311's: http://i46.tinypic.com/mvgetd.jpg (http://i46.tinypic.com/mvgetd.jpg)
L298, Cable, Max232, Attiny's: http://i45.tinypic.com/2eoe53n.jpg (http://i45.tinypic.com/2eoe53n.jpg)
Mega32's and boards: http://i49.tinypic.com/2whjj45.jpg (http://i49.tinypic.com/2whjj45.jpg)
Pics: http://i46.tinypic.com/2zdzihy.jpg (http://i46.tinypic.com/2zdzihy.jpg)
More pictures can be supplied if you request them.
I'm located in NSW Australia but i will ship world wide.
If you need anything small extra i might chuck it in for you free eg headers, leds, crimps etc...
Bank deposit and Paypal are both accepted.
I'll be adding more stuff as i find it so be sure to check back every now and again.
Probably about $200-$350 of stuff here to grab a bargain!
All prices are negotiable so feel free to pop me an offer by pm or in here :)
-
You willing to do a trade? I have lots of computer accessories I've collected but don't use.
-
Yep, id probably accept trades, pm me?
-
I would go for the Atmega32... if they are TQFP....
But... are you really considering shipping here at Greece ???
-
If buyer pays shipping ill ship to anywhere :) and yes, they are TQFP
-
Airmail prices for such light things seem ok... I guess a small folder wouldn't weight more than 10 - 20 grams...
So what price is the seller suggesting?
I'm considering a larger order from Mouser.... So I'll drive a hard bargain for the two parts...
And what payment method is suggested? Bank transfer account is optimum ;-)
But really now... most odds are that the price won't satisfy me... :P
I'm getting the Atmega32A for ~3Euros a piece from Mouser... But something close would make me happy enough.... ::) ::)
-
Nah, if you're ordering from mouser anyway, it'd probably be cheaper if you bought from them both on the part price and the shipping. But thanks anyway :)
-
Ooooooo.....
Lots of stuff. Free extra small stuff.
One question, what do your servo's include?
Do they have the mounting cubes that don't usually get used anymore?
Meaning the ones in this used to mount the servo's
http://www.societyofrobots.com/mechanics_chassisconstruction.shtml (http://www.societyofrobots.com/mechanics_chassisconstruction.shtml)
-
Erm, no... I don't really... Ill post some pics of the mounting hardware i do have sometime.
Although, a small block of wood or an L bracket normally suffices for mounting servos...
-
I'm interested in the roboduino, how much are you looking for it?
I'll pay with paypal if that's OK, much simpler than bank transfers...
-
Erm, i think the roboduino is already sold - If the guy can't buy it then its yours :)
-
hm :-\
how much for one or two of the through hole max232? i thought they only existed in SSOP packages...
-
Probably a couple of bucks each + shipping?
-
Not really robotics related but would anyone want a 16gb sony microvault or should i ebay it?
-
Now that I'll trade for!
I really need a new jump drive...
-
Being serious? Pm me?
-
Im interested for all the servos you are selling .
Please let me know their price and the shiiping costs....
-
Sorry, all the stuff posted has been sold.