Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: awally88 on August 18, 2010, 10:32:39 PM

Title: Eagle Part for AtMega640
Post by: awally88 on August 18, 2010, 10:32:39 PM

Hey guys,

I was just wondering if anyone has a good Eagle Part File for the Atmel AtMega640 chip, there isn't one in the default Eagle Libraries that I've been able to find, and the couple I did find on the net were a bit crappy.

Thanks
Awally

Title: Re: Eagle Part for AtMega640
Post by: dunk on August 19, 2010, 01:18:28 AM

the place to look for Eagle libraries is on the Cadsoft website:
http://www.cadsoftusa.com/cgi-bin/download.pl?page=/home/cadsoft/html_public/download.htm.en&dir=eagle/userfiles/libraries (http://www.cadsoftusa.com/cgi-bin/download.pl?page=/home/cadsoft/html_public/download.htm.en&dir=eagle/userfiles/libraries)

the ATmega640 is in this library:
ftp://ftp.cadsoft.de/eagle/userfiles/libraries/atmel-2005.lbr (http://ftp://ftp.cadsoft.de/eagle/userfiles/libraries/atmel-2005.lbr)


dunk.

Title: Re: Eagle Part for AtMega640
Post by: Webbot on August 19, 2010, 07:24:28 AM

The other useful site is the Eagle libraries published by SparkFun http://www.opencircuits.com/SFE_Footprint_Library_Eagle (http://www.opencircuits.com/SFE_Footprint_Library_Eagle)