Society of Robots - Robot Forum

Mechanics and Construction => Mechanics and Construction => Topic started by: gcs7788 on March 02, 2011, 11:52:51 AM

Title: Hi anybod pls help me out
Post by: gcs7788 on March 02, 2011, 11:52:51 AM

Hello paul ,
                  I was trying to built a remote robot one
                  i was now in design phase , can you please help me out and also i was trying to get an  order from online shop these things ... becoz i cant make all @ 1st time (my guess)
 Here are my few specification on given list

omni wheels -4x (4cm diameter)
servo motor  -4 (high torque rc )
velcro - 4x6 inches
HDPE material (14x8 )And
 Digital rc controller kit  :: Here I need with 6 or more  channel and 3-4 deg's of freedom   
t- nuts  set 1/4" - 8
for attaching servos to channel  is they provide connectors to insert into rec channel directly.my robot is around 7-8 kgs has to weight is this wheels n servos can bare the weight
please let me know any thing that i need to buy for construction have look @ once design phase


THanks in advance

Title: Re: Hi anybod pls help me out
Post by: praveen_khm on March 04, 2011, 04:12:47 AM

It is always good to order once you are through with your design and schematics, or atleast that is how I work. If you add a design or schematic here and the complete description, it is easier to help you out.

For heavier weight, it is always good to use a geared motor.

edit: Might help you: http://www.societyofrobots.com/robotforum/index.php?topic=12118.0 (http://www.societyofrobots.com/robotforum/index.php?topic=12118.0)