Society of Robots - Robot Forum

Software => Software => Topic started by: Sarah21 on May 04, 2011, 07:56:20 AM

Title: problem with uploading the SRV1Test to the internet
Post by: Sarah21 on May 04, 2011, 07:56:20 AM

Dear all....how r u... am back again with another problem..

this problem is related to uploading the SRV1Test console to the internet..

it was tested with the matchport b/g and it worked fine.. but when I tried to upload this console to the matchport b/g's internet page to view it.. I got a blank page with a black X box...

I tried the same steps with my GUI and the process was completed successfully... and commands were sent ..

I don't know what is the problem with the SRV1Test.. I got it from the latest firmware file...

I used it because I don't need the controlling buttons in the button.. and this SRV1Test is easier to modify...

thanx in advance

Title: Re: problem with uploading the SRV1Test to the internet
Post by: adanvasco on June 09, 2011, 02:13:14 PM

Can you please post some of your code to take a look at it?