Society of Robots - Robot Forum

Mechanics and Construction => Mechanics and Construction => Topic started by: In2Dusk on July 24, 2011, 05:25:52 AM

Title: Servo screw diameters
Post by: In2Dusk on July 24, 2011, 05:25:52 AM

I have RS-2 servo from Modelcraft and i need to know diameters of the screw which holds the plastic cross on the rotation shaft.

Title: Re: Servo screw diameters
Post by: Gertlex on July 24, 2011, 09:02:22 AM

No offense but...

(http://bmicanada.ca/images/digital_caliper.jpg)

Now if you want to know the thread specification, one option if you can't find it on google is to go to a local hardware store, and they will have hardware that you can try putting the scew into to find the correct size.

But it's probably a common specification that you can guess based on the diameter.  See the attached thread chart.