Society of Robots - Robot Forum

Software => Software => Topic started by: Canabots on November 15, 2011, 07:33:07 PM

Title: AVR Studio SP1 and 3
Post by: Canabots on November 15, 2011, 07:33:07 PM

I'm setting up all the software to program my Axon on a new computer.

When installing AVR Studio, I download and install 4.19, as that seems to be the newest setup. However, I just get redirected to a different page for both the SP1 and SP3 links, should I just ignore them?

Thanks.

Title: Re: AVR Studio SP1 and 3
Post by: Gertlex on November 15, 2011, 10:54:53 PM

You're probably fine with 4.19. I'm not sure what I'm using on my laptop (desktop is 4.18, but I don't actually use the desktop for robot coding)... but I do have the two service pack .exe's saved, and can upload them if it turns out they're needed.

Title: Re: AVR Studio SP1 and 3
Post by: Admin on November 16, 2011, 10:34:19 AM

hmmmm it appears that they removed v4.18 and the service packs, and replaced it with just v4.19.

I haven't tried v4.19 yet, but let us know if it gives you any trouble.

edit: hmmmm I also just noticed they now offer an AVR tool chain installer as well:
http://www.atmel.com/dyn/resources/prod_documents/avr-toolchain-installer-3.3.0.710-win32.win32.x86.exe (http://www.atmel.com/dyn/resources/prod_documents/avr-toolchain-installer-3.3.0.710-win32.win32.x86.exe)

Again, I haven't tried it, but if anyone does feel free to comment on it.

Title: Re: AVR Studio SP1 and 3
Post by: Canabots on November 17, 2011, 05:06:22 PM

I've dug in a bit more the past couple days. Found something describing it's 4.18 with all 3 SPs combined. I haven't had to chance to try it out yet, though based on that information, I'll say it will work great!

Thanks

Title: Re: AVR Studio SP1 and 3
Post by: Admin on November 27, 2011, 09:18:56 AM

I gave the AVR tool chain installer, but it breaks with WebbotLib. Don't bother with it for now.