Society of Robots - Robot Forum

Mechanics and Construction => Mechanics and Construction => Topic started by: garriwilson on July 10, 2007, 07:14:49 PM

Title: Servo wires
Post by: garriwilson on July 10, 2007, 07:14:49 PM

My servo wires are connected into a plastic square thing. It says in the tutorial to put the different colors into different places like microcontroller and battery pack. How are you supposed to do that if they're connected?

Title: Re: Servo wires
Post by: KambeiX on July 10, 2007, 07:31:40 PM

they aren't connected. The plastic square thing is a connector.

You can stick wires in each hole (red for Voltage, black for ground and the other connected to the microcontroller)

Title: Re: Servo wires
Post by: garriwilson on July 11, 2007, 12:55:47 PM

if i stick the wires in they're not going to stay there are they?

Title: Re: Servo wires
Post by: Admin on July 11, 2007, 01:07:42 PM

Keep reading on in the tutorial. You will see how the servo is plugged in.

(http://www.societyofrobots.com/images/sbs_plug_servo.JPG)