Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: vipulan12 on November 08, 2012, 05:49:19 PM

Title: MC33926 Motor Driver Carrier compatible with arduino
Post by: vipulan12 on November 08, 2012, 05:49:19 PM

Hey i was wondering if the MC33926 Motor Driver Carrier is compatible with the arduino?

http://www.pololu.com/catalog/product/1213/specs (http://www.pololu.com/catalog/product/1213/specs)

and if there are any tutorials on how to use this motor controller

i want to run 2 DC motors using 2 9volt batteries(18 volts in total), so if you have any cheaper and or easier(to use) recommendations for a motordriver I am all ears
-needs to have reverse voltage protection(obviously)
-can withstand over 18 volts and over 1 amps continuos to motors
- be able to control speed, so PWM included
 

thanks

Title: Re: MC33926 Motor Driver Carrier compatible with arduino
Post by: Mastermime on November 09, 2012, 05:16:04 PM

If you haven't purchased it yet, you may want to consider this http://www.pololu.com/catalog/product/2503 (http://www.pololu.com/catalog/product/2503)