Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: pacman411 on March 12, 2013, 07:15:22 AM

Title: First Robot H-Bridge
Post by: pacman411 on March 12, 2013, 07:15:22 AM

Hello All

I am building a small track robot, that use two small 6vdc motor. The MPU will send the control signal to the H-Bridge. My question is do I need a motor drive circut between the H-Bridge and the motor

Paul

Title: Re: First Robot H-Bridge
Post by: newInRobotics on March 12, 2013, 07:36:23 AM

H-bridge is a motor drive circuit, unless by motor drive circuit You mean something else.

Title: Re: First Robot H-Bridge
Post by: oscyes on March 13, 2013, 08:33:02 PM

You can use a l293d ic it has 4 half h bridges and you can control 2 motors (both directions) with one ic