Society of Robots - Robot Forum

Software => Software => Topic started by: Fihtarot on February 21, 2015, 07:43:49 AM

Title: FreeRTOS and AVR Studio 6
Post by: Fihtarot on February 21, 2015, 07:43:49 AM

Hi, I do not know English, so I use Google translator.

I decided that I wanted to explore the FreeRTOS, but it could not even compile.

I ask your help, I have quite a long time I can not cope with this problem.
Please throw off empty project as an example that is compiled for the ATMega128.
Another problem I'll take by my self

Thank U.

Title: Re: FreeRTOS and AVR Studio 6
Post by: mklrobo on March 02, 2015, 06:45:56 PM

 ;D Hello!
I am not familiar with the software you have, but I will download it
to see if I can compile a program. if it is for a dedicated MCU, most
of my experience is that you have to have the MCU hooked up
and run the compiled program. Keep me posted....  ;D ;D ;D

Title: Re: FreeRTOS and AVR Studio 6
Post by: mixfreak on June 01, 2015, 05:43:42 AM

Hi Fihtarot,

The following link might help. Not related to your controller though. Hope it triggers you something.

http://csdc.uvic.ca/wiki/index.php/Tutorial:New_AT90CANxxx/FreeRTOS_Users (http://csdc.uvic.ca/wiki/index.php/Tutorial:New_AT90CANxxx/FreeRTOS_Users)