Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: jchahn on October 21, 2007, 05:15:03 PM

Title: Working with ARM microcontrollers in Eagle CAD, ExpressPCB, etc.
Post by: jchahn on October 21, 2007, 05:15:03 PM

I've installed and played around with expressPCB.  I haven't tried eagle cad yet.  I've looked through the component list and none of the Atmel AT91 series chips are listed. (The ARM7 chips).   I'm just wondering if there is an online database of custom components that people have made that I can download and use or if I'm just going to have to create a custom component for any chips not already in the library.  Thanks in advance for the help.  Is there a better tool for ARM chips maybe?

Thanks,
John

Title: Re: Working with ARM microcontrollers in Eagle CAD, ExpressPCB, etc.
Post by: Admin on October 21, 2007, 07:08:04 PM

I dont know about expressPCB, but Eagle has a bunch of ARM libraries:
http://www.cadsoft.de/cgi-bin/download.pl?page=/home/cadsoft/html_public/download.htm.en&dir=eagle/userfiles/libraries

And just in case you havn't seen this yet:
http://www.societyofrobots.com/electronics_Eagle3D_tutorial.shtml