Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: Del on January 30, 2008, 02:08:28 PM

Title: Difference between Futaba S-148 and S3003?
Post by: Del on January 30, 2008, 02:08:28 PM

Hi,

Does anybody know what the difference is between the Futaba S-148 and S3003 servos?

(http://www2.gpmd.com/image/f/futm0710.jpg)
http://www3.towerhobbies.com/cgi-bin/wti0001p?&W=001369980&I=LXH318&P=K (http://www3.towerhobbies.com/cgi-bin/wti0001p?&W=001369980&I=LXH318&P=K)

(http://www2.gpmd.com/image/f/futm0031.jpg)
http://www3.towerhobbies.com/cgi-bin/wti0001p?&W=001369980&I=LXH288&P=K (http://www3.towerhobbies.com/cgi-bin/wti0001p?&W=001369980&I=LXH288&P=K)

Also, can any Futaba hub or horn fit on any Futaba servo,
and do they use the same screws for mounting them on the spline?

(such as these:)

(http://www2.gpmd.com/image/f/futm2036.jpg)
http://www3.towerhobbies.com/cgi-bin/wti0001p?&W=001369980&I=LXPTJ4&P=K (http://www3.towerhobbies.com/cgi-bin/wti0001p?&W=001369980&I=LXPTJ4&P=K)

(http://www2.gpmd.com/image/f/futm2280.jpg)
http://www3.towerhobbies.com/cgi-bin/wti0001p?&W=001369980&I=LXXA52&P=K (http://www3.towerhobbies.com/cgi-bin/wti0001p?&W=001369980&I=LXXA52&P=K)

Thanks for any info

Title: Re: Difference between Futaba S-148 and S3003?
Post by: ed1380 on January 30, 2008, 02:37:13 PM

the s3003 is a little bit more powerful


about the escond question.
 read the descriptions for the items