Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: izua on May 01, 2008, 10:24:16 AM

Title: ISP6 pinout
Post by: izua on May 01, 2008, 10:24:16 AM

Hi! I've been looking for a while for the ISP6 programming pinout but I haven't been able to find a good one.
I have ordered a baby orangutan which uses ISP6 with male pins for programming. I am making an adapter board, so I can put wires (i have wires out of my programmer, not a common ISP10 or ISP6 connector). So I will a 3x2 female connector for this board. But I want it universal, to be able to program any other device that uses ISP6 standard.

So, is there a standard pinout, or are there boards out there that have the pinout reversed, mirror, etc?
If it is, please give me a link to the programmer pinout and the pcb pinout. They should be mirrored.

Title: Re: ISP6 pinout
Post by: ccarlson on May 01, 2008, 12:41:20 PM

Useful information may be found here (http://www.hardwarebook.info/AVR_ISP).

Title: Re: ISP6 pinout
Post by: Admin on May 03, 2008, 01:00:01 PM

Pics here:
http://www.societyofrobots.com/robotforum/index.php?topic=1045.0

Title: Re: ISP6 pinout
Post by: pomprocker on May 03, 2008, 01:27:55 PM

Here is an adapter
http://www.sparkfun.com/commerce/product_info.php?products_id=8508http://www.sparkfun.com/commerce/product_info.php?products_id=8508 (http://www.sparkfun.com/commerce/product_info.php?products_id=8508http://www.sparkfun.com/commerce/product_info.php?products_id=8508)


[img width= height=]http://www.sparkfun.com/commerce/images/AVRBreakout-01-L.jpg[/img]

Title: Re: ISP6 pinout
Post by: izua on May 03, 2008, 01:32:56 PM

That's great, but transport to romania isn't cheap from the states, you know.. :P
I'm made my own, since my programmer has a custom pinout anyway. Thanks everyone!