Society of Robots - Robot Forum
General Misc => Misc => Topic started by: chauhan4 on June 23, 2008, 12:02:37 PM
-
Hi,
I am a graduate student working with the iRobot Create but I have to say I don't have a lot of experience with them. I am trying to make the Create wirelessly accessible using a mini-computer called the Gumstix computer stack. The stack consists of a Verdex motherboard, a robostix microcontroller and a wifistick. The next step is interfacing the iRobot Create to the Gumstix and this is where I am stumped. As I mentioned before, I don't have too much experience with this and any kind of help will be useful to me. Has anyone done this in the past? Does anyone know how I could go about doing this? Please let me know.
Thanks,
Adheer
-
Have a look at these robots:
http://www.instructables.com/tag/?q=irobot+create&limit%3Atype%3Aid=on&type%3Aid=on&type%3Auser=on&type%3Acomment=on&type%3Agroup=on&type%3AforumTopic=on&sort=none
-
Here is a sample program that turns the Power LED to red/full-intensity on the iRobot from the gumstix connex.
http://kaju.dreamhosters.com/images/iRobotResources/samplecode.c?8ebd876eaccdb1f92fbddcc872b6f04c=2d03c73598603cbff01046317f658177 (http://kaju.dreamhosters.com/images/iRobotResources/samplecode.c?8ebd876eaccdb1f92fbddcc872b6f04c=2d03c73598603cbff01046317f658177)
The full article is here:
http://kaju.dreamhosters.com/index.php?option=com_content&view=section&layout=blog&id=14&Itemid=66 (http://kaju.dreamhosters.com/index.php?option=com_content&view=section&layout=blog&id=14&Itemid=66)
Best of luck. It's not an easy task, for sure.
-
You realize this was from two years ago right?