Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: TrickyNekro on June 24, 2008, 11:56:32 PM

Title: GLCD pinout and connections
Post by: TrickyNekro on June 24, 2008, 11:56:32 PM

Hello to everyone,

I have worked some time with standard LCDs but not with a graphical...

I have googled and have found some pinout but I don't trust em...
I don't remember which controller it has but I believe it's the standard one for 128x64

And one quick question:
 Where do I connect the VEE ( -5V)????

Lefteris

Title: Re: GLCD pinout and connections
Post by: karlis on June 25, 2008, 10:06:42 AM

Hello, i`m so sorry for this post, but i have 1 question: i`m using atmega16, and i`m planing to use 4x20LCD screen, for some text/error output in future, could you give me some tips, what i should, should not do ? some trusted tutorial ?

Title: Re: GLCD pinout and connections
Post by: izua on June 25, 2008, 06:00:26 PM

yes - make your own thread, or search for it. it's free, ffs.
the most used controllers (afaik) are KS0108 and HD61202 like this (http://www.sparkfun.com/commerce/product_info.php?products_id=710) model from sparkfun