Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: icoms8 on September 11, 2008, 06:56:34 PM

Title: rosin
Post by: icoms8 on September 11, 2008, 06:56:34 PM

ok i need to know the best standerd rosin core solder on digikey.com could sombody tell me what it is and how cheap it is.also do the sevros have to be modified?

Title: Re: rosin
Post by: Trumpkin on September 12, 2008, 08:55:36 AM

Yes, the servos have to be modified otherwise they will not turn a full 360 degrees.

Title: Re: rosin
Post by: ArcMan on September 13, 2008, 03:49:14 PM

I measured the solder diameter that I use.  It's 0.025".

Title: Re: rosin
Post by: Admin on September 16, 2008, 10:18:19 AM

It really depends on what you're soldering. Different solders are better for different jobs.

I have like 10 different types.