Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: pomprocker on January 03, 2009, 11:04:40 PM

Title: ATX p/s to benchtop lab supply conversion
Post by: pomprocker on January 03, 2009, 11:04:40 PM

I did this over the last couple days. Its really cheap, and is very handy. I would highly recommend making one if you have a few bucks and an extra power supply laying around. There are a ton of tutorials on the internet for them.

Title: Re: ATX p/s to benchtop lab supply conversion
Post by: airman00 on January 03, 2009, 11:06:31 PM

mmm nice... I made one myself about 3 months ago. Works surprisingly well.

Title: Re: ATX p/s to benchtop lab supply conversion
Post by: TrickyNekro on January 03, 2009, 11:19:50 PM

Another one in the club... welcome!!!

And if you are handy, you can delay the power cut and test hobby motor and such which drain a hell in start up!!!

Cheers!!!