Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: frodo on January 17, 2009, 07:23:00 PM

Title: Futaba S148 servo modification - plz help
Post by: frodo on January 17, 2009, 07:23:00 PM

hi, has anyone used the Futaba S148 servo? if anyone has, is it the same to modify as the hitec HS-311 using admins instructions?

Title: Re: Futaba S148 servo modification - plz help
Post by: Razor Concepts on January 17, 2009, 07:47:16 PM

All servos run on the same principle, so you will be able to modify it without a problem.

Title: Re: Futaba S148 servo modification - plz help
Post by: frodo on January 18, 2009, 07:37:32 AM

ok thanks.

Title: Re: Futaba S148 servo modification - plz help
Post by: Admin on February 02, 2009, 07:42:20 AM

Some of the really small micro servos aren't modifiable, at least not easily. Standard size servos are all modifiable.

Title: Re: Futaba S148 servo modification - plz help
Post by: scottad73 on August 15, 2010, 06:48:04 PM

just for those interested, the Hitec HS322-HD is one of the easiest servos to mod to 360 degrees.  Just center the servo, remove the gear case, cut the notch on the drive gear, cut the exposed knob off from the pot and glue the cut knob. your done.  web has good pics of it