Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: Hawaii00000 on January 25, 2009, 06:08:01 PM

Title: Another question about modifying servos
Post by: Hawaii00000 on January 25, 2009, 06:08:01 PM

I'm trying to modify a servo using this website - http://www.seattlerobotics.org/guide/servohack.html
but I'm not sure how to wire the resistors is it like this...



   to outside   ------resistor-------\
                                           l----------------   to middle
   to outside   ------resistor-------/

Title: Re: Another question about modifying servos
Post by: airman00 on January 25, 2009, 06:20:01 PM

http://narobo.com/articles/ModServos.html