Society of Robots - Robot Forum

Software => Software => Topic started by: Its_Friday on February 07, 2009, 12:55:51 PM

Title: Wrong Device Informations
Post by: Its_Friday on February 07, 2009, 12:55:51 PM

i'm trying to upload a file to the axon microcontroller via cmd.

Code: [Select]

C:\DOCUME~1\user\robot>FBOOT17.EXE -b115200 -c4 -pservo0.hex -vservo0.hex
COM 4 at 115200 Baud: Connected
Bootloader VFFFFFFFF.FF
Error, wrong device informations
I did make sure that the device was plugged into the com 4 port at a 115200 baud rate. I reinstalled FBOOT17.exe. I have uploaded a couple files before this one without a problem.

Title: Re: Wrong Device Informations
Post by: Its_Friday on February 07, 2009, 03:26:34 PM

Ok, i fixed the problem...kind of. I simply plugged the microcontroller into another usb port.