Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: yerbie on February 13, 2009, 05:39:34 PM

Title: Axon question about number of PWM available
Post by: yerbie on February 13, 2009, 05:39:34 PM

I read this on the Axon specification page:

Quote

Up to 9 PWM Channels (7 without modification)

http://www.societyofrobots.com/axon/

What/How can you modify to get the extra 2 PWM channels?

Title: Re: Axon question about number of PWM available
Post by: Admin on February 13, 2009, 08:16:06 PM

The on/off switch uses a PWM pin. Basically you solder a wire to one end of the on/off switch.

The green LED also uses a PWM pin, and you can solder a wire to that as well.

But of course, you lose functionality by doing that.