Society of Robots - Robot Forum

Software => Software => Topic started by: shivamkalra on April 24, 2009, 11:53:52 AM

Title: Software for controlling stepper motor( angular velocity, torque, direction etc.
Post by: shivamkalra on April 24, 2009, 11:53:52 AM

hey guys, i finally completed my school project about controlling stepper motor using computer parallel port... coding is done in c#.NET ,, ::)

1) u can set angular velocity .
2) torque
3) direction
4) angle of rotation

i used unipolar motor with 7.5 degree of rotation per step .. to download my software and read more about my project check out my site ... :D

http://www.corpogeek.com/2009/04/controlling-steper-motor-with-pc.html (http://www.corpogeek.com/2009/04/controlling-steper-motor-with-pc.html)

Or u can directly download the program from the link below  ::)

http://www.box.net/shared/2mmyaxapeh (http://www.box.net/shared/2mmyaxapeh)

Regards

Shivam

 8)
 ;D ;D

Title: Re: Software for controlling stepper motor( angular velocity, torque, direction etc.
Post by: strif on November 06, 2011, 01:50:29 PM

can share the hardware component diagram ? thanks