Society of Robots - Robot Forum

Software => Software => Topic started by: meiralfasi on July 31, 2009, 08:13:15 AM

Title: Axon Problem
Post by: meiralfasi on July 31, 2009, 08:13:15 AM: Need Help .

I bought Axon Microcontroller , install software and use bootload, i uploaded the Servo center program and when i connect the servo to terminal h2 the servo going from side to side then i connect the servo to any terminal same thing happend.

i use a diffrent servo , the same thing happend .

i downloaded the led switch program and nothing happend maybee i got a bad axon microcontroller I'm lost
any help will be appreciated.

PS . infact any program from the source sample code that i download douse not work when i use bootload the is confermation that the program install successfully.
Title: Re: Axon Problem
Post by: Tomas on August 03, 2009, 04:22:10 AM: I had some problems with the premade sourcecode from this site. I also thought the axon unit I got was broken. But it worked programming it. Just try creating something for yourself in AVR studio. It should be pretty easy.
Title: Re: Axon Problem
Post by: meiralfasi on August 03, 2009, 06:52:16 AM: I will greatly appreciate if you post a program that actually works.

This is reticules, why the have example in the website that are not working properly.
Title: Re: Axon Problem
Post by: Razor Concepts on August 03, 2009, 09:11:24 AM: Could you post exactly what you typed in the command line to get the program to bootload.
Title: Re: Axon Problem
Post by: meiralfasi on August 03, 2009, 09:41:05 AM: This is the command line for the bootloader fboot17.exe -b115200 -c2 -paxon_ser.hex -vaxon_ser.hex I got conformation I connected the servo to any pin include H2 the servo go to one side and still pulsing it dose that with any pin . I uploaded diffrent program and nothing happend.
Title: Re: Axon Problem
Post by: Admin on August 03, 2009, 02:32:21 PM: double posting, here is my response:
http://www.societyofrobots.com/robotforum/index.php?topic=8706.msg67721#msg67721