Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: zebrain on August 11, 2010, 12:24:36 PM

Title: PID Line Follower By Pratheek PCB Dimensions
Post by: zebrain on August 11, 2010, 12:24:36 PM
The dimensions of the sensor array as well as the main PCB is given to be the same i.e 10cm x 4.5cm.It must be rite for the sensor array,so what is the correct dimensions for the main board??
Title: Re: PID Line Follower By Pratheek PCB Dimensions
Post by: Aravindh on September 25, 2010, 05:19:45 AM
Hi the dimensions arent correct...
U have to create ur own diagram and u cant fabricate the pcb given in the diagram..
Title: Re: PID Line Follower By Pratheek PCB Dimensions
Post by: [email protected] on December 25, 2011, 10:07:07 AM
hey anyone...
please tell me where the push buttons need to be connected!
Title: Re: PID Line Follower By Pratheek PCB Dimensions
Post by: Soeren on December 25, 2011, 01:59:53 PM
Please don't post the same question in several (old) threads!
Title: Re: PID Line Follower By Pratheek PCB Dimensions
Post by: [email protected] on December 25, 2011, 11:09:13 PM
hi soren....
i just wanted to know .......
1)where the push buttons are connected .
2)what is the meaning of IC1 in the figure
3)there are 7 pins at the bottom of the board(just below the ATmeag16 IC),nothing is mentioned about them....so what must be connected to them!
link is http://www.societyofrobots.com/member_tutorials/book/export/html/350 (http://www.societyofrobots.com/member_tutorials/book/export/html/350)
I'll be really grateful to u... pls help me out of this situation. 
Title: Re: PID Line Follower By Pratheek PCB Dimensions
Post by: Soeren on December 26, 2011, 09:57:30 AM
hi soren....
i just wanted to know .......
Yeah yeah, but that is not an excuse for multiposting (spamming) with the same question.
No reason for verbatim copy to my PM either - One post in the public forum will do (and not annout the daylight out of other people).