Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: Hawaii00000 on January 07, 2009, 01:13:53 AM

Title: [i]C Programming Language[/i] , 2nd edition... A good book for robotics program?
Post by: Hawaii00000 on January 07, 2009, 01:13:53 AM
Admin mentions the book The C Programming Language , 2nd editon in his list of books ( http://www.societyofrobots.com/robot_books.shtml ) What I wanna know is if its good for robotics programming or is it more focused on computer programming? Has anyone read it?
Title: Re: [i]C Programming Language[/i] , 2nd edition... A good book for robotics program?
Post by: Trumpkin on January 07, 2009, 08:33:08 AM
If you learn C for computer programming, you'll also understand C for robotics programming.
Title: Re: [i]C Programming Language[/i] , 2nd edition... A good book for robotics program?
Post by: siempre.aprendiendo on January 07, 2009, 12:27:03 PM
A very good introduction book to c & robotics with ATMEL microcontrollers is "C Programming for Microcontrollers" by  Joe Pardue. Because there are some questions only related to microcontrollers and the microcontroller model you choose.

But I think it's better to learn C with a PC, it's easier and you can focus on the language.
Title: Re: [i]C Programming Language[/i] , 2nd edition... A good book for robotics program?
Post by: Admin on January 26, 2009, 04:16:45 AM
I learned C++ from books and classes. I found moving on to C and programming robots was very intuitive after that, didn't really need a book or anything. Source code was enough to self learn.