Society of Robots - Robot Forum

Electronics => Electronics => Topic started by: mwmckee21 on September 16, 2009, 01:09:32 PM

Title: $50 Robot not quite working
Post by: mwmckee21 on September 16, 2009, 01:09:32 PM
I am having issues with my $50 robot.  When I plug in the power the servos work, however they do not react to the photo resistors.  I have even tried to use a potimeter, but that still doesn't work.  Below are some pictures of my robot, note that it is connected on two boards due to radio shack not having the main board in stock at the time of purchase. 

http://www.flickr.com/photos/[email protected]/?saved=1 (http://www.flickr.com/photos/[email protected]/?saved=1)
Title: Re: $50 Robot not quite working
Post by: MangoBot on September 22, 2009, 07:47:02 AM
check everything with a multimeter and sheck to see if anything is un-connected. It could be that your photoresistors are busted