Author Topic: Molex connectors (Read 4232 times)

Its_Friday · « **on:** March 23, 2009, 05:38:59 PM »

Where do i purchase male molex connectors or just the pins themselves?

Soeren · « **Reply #1 on:** March 23, 2009, 05:45:43 PM »

Hi,

In most well assorted electronics shops and where PC modders gets their stuff.

Its_Friday · « **Reply #2 on:** March 23, 2009, 05:51:20 PM »

how about those small molex pins on microcontrollers?

Razor Concepts · « **Reply #3 on:** March 23, 2009, 05:59:30 PM »

Male ones are called pin headers, molex refers to the female socket.

Its_Friday · « **Reply #4 on:** March 23, 2009, 06:31:51 PM »

i am having a bit of trouble finding the pin headers similar to those found on the axon microcontroller :/

Metal Slug 2 · « **Reply #5 on:** March 23, 2009, 07:23:38 PM »

you can buy them at:

www.mouser.com or

www.digikey.com

or any similar electronics store.

Its_Friday · « **Reply #6 on:** March 24, 2009, 03:33:16 PM »

i'm finding it neigh impossible to find 1 1mm pin, or rows of 3 1mm pins>_<

chelmi · « **Reply #7 on:** March 24, 2009, 04:06:45 PM »

i'm finding it neigh impossible to find 1 1mm pin, or rows of 3 1mm pins>_<

You buy a row of 40 and use a plier to snap them off at desired length!

Its_Friday · « **Reply #8 on:** March 24, 2009, 04:13:50 PM »

i can't even find those:(

Razor Concepts · « **Reply #9 on:** March 24, 2009, 04:15:05 PM »

1mm is not the standard header. Standard headers are 0.1 inches or 2.54 millimeter spacing.

Its_Friday · « **Reply #10 on:** March 24, 2009, 04:31:42 PM »

silly me, i was measuring the diameter of the pin itself instead of the base xD

Society of Robots - Robot Forum