Beginners: please read this post and this post before posting to the forum.
0 Members and 1 Guest are viewing this topic.
I'm running at 15200, and mine has always taken a minute or so to program. I would love to know what you change if you do get it back to a few seconds.
I'm running at 15200
airman00, please try out the other Axon too. If it just happens to one, that could mean its a hardware issue.
airman00 did you ever buy that hardware programmer? It's probably not the bootloader on the Axon however, but it's something to rule out.
airman00 did you ever buy that hardware programmer? It's probably not the bootloader on the Axon however, but it's something to rule out.I'm starting to suspect FBOOT.EXE is the cause. I'll see if I can fix FBOOT (it's open source). Glancing at the code, it only supports COM1-4. I *think* I can fix that easily. If only 'open source' meant 'has comments to explain code'
Yea i have the hardware programmer , you want me to try regular ISP without the bootloader?
i also looked at modifying fboot.exe some time ago, it looks like there is a one line simple fix to adding more com ports, but I could be wrong also
...Anything else I should try?
I also have a RS232-TTL dongle that I might be able to plug directly to the UART pins on the Axon, to see if the code loads faster. Too bad this UART is not connected to a 3 pin header...
Support for Windows XP with Service Pack 2 (SP2) will end on July 13, 2010.