Author Topic: breakout board  (Read 1015 times)

0 Members and 1 Guest are viewing this topic.

Offline sml2010Topic starter

  • Beginner
  • *
  • Posts: 2
  • Helpful? 0
breakout board
« on: January 02, 2012, 07:25:23 AM »
Hi to all


We need a breakout board that be able to accept six encoders and six limit switch.
I need this breakout board connect with USB or network port not with LPT port

Can you please help me to find it?

I am wait for your help


Thank you

Offline Soeren

  • Supreme Robot
  • *****
  • Posts: 4,672
  • Helpful? 227
  • Mind Reading: 0.0
Re: breakout board
« Reply #1 on: January 02, 2012, 04:22:17 PM »
Hi,

[...] breakout board [...] six encoders and six limit switch. [...] connect with USB or network port not with LPT port
It's not a breakout board that you need.

Your limit switches will take one line each, but so far, only you know what encoders you have and how many bits they need each (or if they have analog outputs or not).
So, depending on the encoders, your solution will be a minimum 12 bits and maximum ?? bits USB interface, with or without A/D-C converters.
Regards,
Søren

A rather fast and fairly heavy robot with quite large wheels needs what? A lot of power?
Please remember...
Engineering is based on numbers - not adjectives

 


Get Your Ad Here